• SIGHT PRO MGW More Detail

    SIGHT PRO MGW

    $17.99 - $351.99$17.99 - $351.99

    Main Sight Tool - Now comes with the 30 degree pusher block for Glock and HK sights. A must have for Gunsmiths and Armorers. The Sight Pro uses a unique clamping shoe design, plus 4 slide support pads and a white nylon spacer block to lock the slide in place while adjusting or replacing sights. Two cuts on the lower section of the tool allow you to lock it in a bench vise. Redesigned to make it easier to swap out the pusher blocks. Shoes do not come with Sight Tool. Slide Shoe - Unique clamping shoes are firearm specific. These work with the MGW Sight Pro. 1911, Issue:11, Page:063 Big Book Catalog, Issue:69, Page:149 Big Book Catalog, Issue:69, Page:484

    HOT!
  • SEMI-AUTO SIGHT MOVER MGW More Detail

    SEMI-AUTO SIGHT MOVER MGW

    $99.99 - $139.99$99.99 - $139.99

    Adjusts, Removes & Installs Sights Without Damage Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smooth, precise movement. Beretta/Glock fit rear sights only. Glock Flat-Side fits aftermarket rear sights with straight, non-sloped sides for standard- and large-frame Glock pistols. SIG fits rear sights on all SIGs except SIG-PRO. Smith & Wesson M&P fits both and front and rear sights; will not fit Pro models with 5" barrel. Will not fit the Shield model. Separate Shield model available. Springfield XD fits both front and rear sights on all XD models except front sight on 5" barrel Tactical model. These do not work on the front sights of Pro/Tactical or sub compact XD/XDM model front sights. Will not work on XD-S slides. 1911 will not work with most Kimber slide/sight combinations. Only works on rear sights. Not for installing or adjusting front sights. Sig fits P220, P225, P226, P228, P239 only. Does not fit Sig Pro series. Does not fit P220 Elite Shadow. Does not work on adjustable sights. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. 1911, Issue:11, Page:061 Big Book Catalog, Issue:69, Page:147 Big Book Catalog, Issue:69, Page:480 Big Book Catalog, Issue:69, Page:483

    HOT!
  • SIGHT INSTALLATION TOOL for GLOCK® TRIJICON More Detail

    SIGHT INSTALLATION TOOL for GLOCK® TRIJICON

    $139.99$139.99

    Install, Adjust & Remove Glock Sights Without Damage Specifically designed to install, adjust and remove all models of Trijicon Glock Sights without damage. Includes heavy-duty rear sight mover with oilite bushings that allow for very fine windage adjustments, and a front sight nut driver that fits all models of aftermarket front sights. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:303 Big Book Catalog, Issue:69, Page:483

    HOT!
  • GLOCK 42/43 ADAPTER KIT MGW More Detail

    GLOCK 42/43 ADAPTER KIT MGW

    $33.99$33.99

    Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols.  The adapter kit includes the adapter spacer and the shoe. Does not include sight pusher body Big Book Catalog, Issue:69, Page:483

    HOT!
  • P500 UNIVERSAL SIGHT TOOL B & J MACHINE More Detail

    P500 UNIVERSAL SIGHT TOOL B & J MACHINE

    $24.99 - $215.99$24.99 - $215.99

    Safely Removes & Installs Dovetail Front & Rear Sights; Works On Shallow, Cross-Dovetails Precision-machined, steel tool safely removes, installs and adjusts front and rear sights on handguns. Clamp your slide into the tool and line up the sights with the tool’s pusher tip for installation, removal, or adjustment. Mobile jaw customizes to the height of your slide and can be used from the right or left side. Delrin® liner protects slide from scratches. Includes three sight pushers that attach to the end of the sight-pushing bolt. 1⁄4" square tip works perfectly on shallow, cross-dovetail sights. Hold Down Clamp helps prevent the slide from twisting in the frame of the P500 by applying extra force to the top of the slide. Provides a secure seat in the tool when working with hard-to-remove sights or slides with angled sides, like the Springfield Armory XD and the S&W M&P. Slide Stop speeds up the process of performing the same sight job on a large number of the same model pistol. Stop simply screws to the P500 frame and lets you position each slide in exactly the same place to perform the necessary sight adjustment quickly and easily. P500 Universal Sight Tool Kit combines P500 Universal Sight Tool with the Hold Down Clamp and Slide Stop to provide the ultimate of flexibility and versatility in a sight adjustment tool. 1911, Issue:11, Page:062 Big Book Catalog, Issue:69, Page:150 Big Book Catalog, Issue:69, Page:484

    HOT!
  • P500 PRO UNIVERSAL SIGHT TOOL B & J MACHINE More Detail

    P500 PRO UNIVERSAL SIGHT TOOL B & J MACHINE

    $274.99$274.99

    All of the optional accessories that are available for the standard P500 Universal Sight Tool are in this P500 PRO Universal Sight Tool. Added a two position Hold Down Clampo that is attached to the tool. This speeds the set up time, and greatly increases the strength of the tool, by preventing the slide from lifting or twisting. Also added an End Plate to add strength and it doubles as a Slide Stop. The most important additions are the newly designed Pusher Tips. These hardened steel tips use the cross member as a guide to prevent rotation that may cause scaring of the sight. One of the tips is squared on the end for standard sights. The other is made with an angle to fit against a tapered sight, such as the Glock. Big Book Catalog, Issue:69, Page:484

    HOT!
  • FRONT SIGHT PUSHER WILLIAMS GUN SIGHT More Detail

    FRONT SIGHT PUSHER WILLIAMS GUN SIGHT

    $13.99 - $60.99$13.99 - $60.99

    Easiest Way to Install A Front Sight In A RampIn the past, there was only one acceptable way to install a front sight in a ramp - pound it in with a hammer from the side. This method frequently marred a beautiful finish and loosened or damaged the ramp. The Williams Front Sight Pusher is the easiest and best way to install a front sight in a ramp. Equalizing the pressure on ramp and sight, it permits installation without marring or dam- aging. Eliminates excessive pressure on the ramp. Smoothly, accurately moves sight into exact position. Big Book Catalog, Issue:69, Page:473 Big Book Catalog, Issue:69, Page:488

    HOT!
  • UNIVERSAL SIGHT INSTALLATION TOOL MEPROLIGHT More Detail

    UNIVERSAL SIGHT INSTALLATION TOOL MEPROLIGHT

    $679.99$679.99

    Adjust & Install Over Forty Different Semi-Auto Pistol Sights Universal bench tool provides accurate cross-dovetail pistol sight adjustment and installation without damage to the sight or the slide. Multi-position, slide support block and separate slide clamp adjust quickly and give tremendous versatility. Flex-free body is machined from a solid block of aluminum alloy. Square threaded adjustment screw with hardened handle provides plenty of leverage to move even the most stubborn sight without damage. Includes attachment ears for bench mounting. 1911, Issue:11, Page:063 Big Book Catalog, Issue:69, Page:150 Big Book Catalog, Issue:69, Page:484

    HOT!
  • H&K USP/P2000 SIGHT ADJUSTMENT TOOL AMERIGLO More Detail

    H&K USP/P2000 SIGHT ADJUSTMENT TOOL AMERIGLO

    $133.99$133.99

    Removes, Installs & Adjusts Dovetail Sights Without DamagePrecision CNC machined tool safely removes, installs and adjusts fragile Tritium, front and rear night sights on H&K USP and P2000 pistols. Easy-to-use, just place your pistol slide in the tool, making sure the sight dovetail lines-up with the sight pusher, then turn the adjustment knob to clamp the slide in place. Turn the easy-to-grasp, hardened steel T-handle to slowly press the pusher tip against the sight and gently push the sight into the dovetail. Self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads help ensure smooth, precise sight adjustment. Specifically designed for use with fixed, front and rear, dovetailed Tritium night sights. Big Book Catalog, Issue:69, Page:484

    HOT!
  • SIGHT ADJUSTMENT TOOL SIG SAUER More Detail

    SIGHT ADJUSTMENT TOOL SIG SAUER

    $244.99$244.99

    FITS: P220; P225; P226; P228; P229; P239 Big Book Catalog, Issue:67, Page:661

    HOT!
  • SKS/AK-47/M&P15T FRONT SIGHT TOOL TAPCO WEAPONS ACCESSORIES More Detail

    SKS/AK-47/M&P15T FRONT SIGHT TOOL TAPCO WEAPONS ACCESSORIES

    $5.99$5.99

    Makes Fast, Precise Front Sight AdjustmentsHandy pocket tool makes quick work of front sight elevation adjustments on most AK and SKS variants, and the Smith & Wesson M&P15T rifle with folding front sight. Wide thumb pads provide plenty of leverage to turn even stubborn front sight posts. Brass engagement insert wont damage or scratch the metal finish. Big Book Catalog, Issue:69, Page:473

    HOT!
  • PS90/P90 Sight Adjustment Tool FN More Detail

    PS90/P90 Sight Adjustment Tool FN

    $46.99$46.99

    Adjustment Tool for PS90 & P90 Sights. Big Book Catalog, Issue:69, Page:474

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!