• CONTOUR #4 BARREL...BY SHILEN SHILEN More Detail

    CONTOUR #4 BARREL...BY SHILEN SHILEN

    $191.99 - $350.00$191.99 - $350.00

    Contour #4 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • CONTOUR #3 BARREL SHILEN More Detail

    CONTOUR #3 BARREL SHILEN

    $191.99 - $284.99$191.99 - $284.99

    Contour #3 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • CONTOUR #5 BARREL SHILEN More Detail

    CONTOUR #5 BARREL SHILEN

    $191.99 - $350.00$191.99 - $350.00

    Contour #5 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • SELECT MATCH BARREL SHILEN More Detail

    SELECT MATCH BARREL SHILEN

    $343.99$343.99

    Superb Stainless Steel Barrels For Top AccuracyHand chosen for the ultimate in accuracy. Button rifled, stress relieved, hand lapped, air gauged and optically inspected to ensure that each one falls within the Select Match category. That means within .0003" of specs and uniform over the entire bore to within .0001". Not threaded or chambered. Big Book Catalog, Issue:69, Page:165

    HOT!
  • RIFLE BARRELS LOTHAR WALTHER PRECISION TOOL More Detail

    RIFLE BARRELS LOTHAR WALTHER PRECISION TOOL

    $235.41 - $249.99$235.41 - $249.99

    Quality & Craftmanship Produces Barrels Of Unparalleled AccuracyCountless numbers of world champion shooters have depended on Lothar Walther rifle barrels for consistently high performance, now you can too. Each and every barrel is meticulously crafted; button rifled in a closely controlled environment that assures bore uniformity to within .000227", then painstakingly lapped to produce a superior rifle barrel capable of outstanding accuracy and long-lasting performance. Contoured blanks are finish machined and unchambered. Big Book Catalog, Issue:69, Page:168

    HOT!
  • UNTURNED BARREL...BY SHILEN More Detail

    UNTURNED BARREL...BY SHILEN

    $158.99 - $238.99$158.99 - $238.99

    Unturned Blank in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plan under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166 Big Book Catalog, Issue:69, Page:232

    HOT!
  • CONTOUR #2 SHILEN More Detail

    CONTOUR #2 SHILEN

    $191.99 - $271.99$191.99 - $271.99

    Contour #2 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • PISTOL BARREL SHILEN More Detail

    PISTOL BARREL SHILEN

    $98.99 - $158.99$98.99 - $158.99

    Match-Grade Contoured & Unturned Blanks For Custom Revolvers, Silhouette Guns & More Famous Shilen accuracy in a chrome moly or stainless barrel that's great for silhouette or custom hunting handguns. All stainless steel barrels are hand lapped at the factory. Big Book Catalog, Issue:69, Page:232

    HOT!
  • CONTOUR #6 BARREL SHILEN More Detail

    CONTOUR #6 BARREL SHILEN

    $191.99 - $274.99$191.99 - $274.99

    Contour #6 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with eight lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • CONTOUR #5 DOUGLAS More Detail

    CONTOUR #5 DOUGLAS

    $239.99 - $324.99$239.99 - $324.99

    Match-Grade Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • CONTOUR #4 DOUGLAS More Detail

    CONTOUR #4 DOUGLAS

    $236.99 - $304.99$236.99 - $304.99

    Match-Grade Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • CONTOUR #3 DOUGLAS More Detail

    CONTOUR #3 DOUGLAS

    $229.99 - $292.99$229.99 - $292.99

    Match-Grad Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • Bartlein Benchrest Barrels BARTLEIN BARRELS More Detail

    Bartlein Benchrest Barrels BARTLEIN BARRELS

    $369.44 - $399.99$369.44 - $399.99

    Bartlein is a barrel maker owned and operated by shooters who have been involved in barrel making for many years. They built state-of-the-art cut rifling machines which Bartlein says can hold uniform twist rates to the 4th decimal point. Several nationally known benchrest shooters shoot Bartlein barrels. We have Bartlein barrls on many of our own benchrest rifles, and they shoot well. Heavy Varmint Blank 6mm 1.250 inch Tapering to .900 inch 1-14 inch Twist, 29 inch Blank. Weighs: 7.5 lbs. 6 mm Light Varmint Blank 1.200 inch Tapering to .875 inch 1-13.5 inch Twist, 29 inch Blank. Weighs: 7 lbs. 6.5mm Heavy Varmint blank 1.250 inch Tapering to .900 inch 1-8.5 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 6mm Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 31 inch Blank. Weighs: 7.8 lbs. 22 cal Heavy Varmint Blank 1.25 inch Tapering to .900 inch 1-8 inch Twist, 29 inch Blank. Weighs: 7 lbs. Sinclair, Issue:5B, Page:238

    HOT!
  • BARREL BLANKS GREEN MOUNTAIN More Detail

    BARREL BLANKS GREEN MOUNTAIN

    $79.99 - $99.99$79.99 - $99.99

    Top-Quality Construction; Ideal For A Super-Accurate Small Caliber RifleButton-rifled, 4140 chrome moly or stainless steel barrel blanks are stress-relieved and air gauged to +/- .0002" for superb accuracy and performance from your custom rimfire rifle. Not chambered or threaded, ready for custom fitting. Big Book Catalog, Issue:69, Page:169

    HOT!
  • KRIEGER BENCHREST BARREL BLANKS KRIEGER BARRELS, INC More Detail

    KRIEGER BENCHREST BARREL BLANKS KRIEGER BARRELS, INC

    $349.99 - $379.99$349.99 - $379.99

    Krieger stainless steel competition rifle barrels usually appear on the top finisher's equipment lists in benchrest, high power, long range, and Palma competitions. Many top gunsmiths are recommending Krieger barrels because of their consistent quality and performance. This consistent performance is due to a combination of the processes Krieger employs - from 416 stainless steel made to their own specifications, the singe-point cut - rifling method used to rifle the barrels and the cryogenic treatment each barrel relieves before it is machined. We currently stock four different target style barrel blanks: 6mm Light Varmint Benchrest; .237inch bore, 29 inch blank 1:14 twist 1.2 inch breach diameter tapering to a muzzle of .875 inch. Weight: Approx 7lbs at 26 inches. 6mm Heavy Varmint Benchrest; .237 inch bore diameter, 269 inch blank 1:14 twist 1.25 inch breach diameter tapering to a muzzle diameter of .900 inch. Weight: Approx 7.5 lbs at 26 inches. 6.5mm 1:8.5 Twist Std Palma Taper 1.25 inch Breech Diameter .820 inch Muzzle Diameter) 30 inch Finished Length. Weight: Approx 5.5 lbs. 30 caliber 1:13 Twist Std Palma Taper 1.25 inch Breech Diameter .820 inch Muzzle Diameter 30 inch Finished Length. Weight: Approx 5.5 lbs. Sinclair, Issue:5B, Page:238

    HOT!
  • CONTOUR #7, 8 & 9 BARREL SHILEN More Detail

    CONTOUR #7, 8 & 9 BARREL SHILEN

    $191.99 - $271.99$191.99 - $271.99

    Contours #7, 8 & 9 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • CONTOUR #2 DOUGLAS More Detail

    CONTOUR #2 DOUGLAS

    $229.99 - $292.99$229.99 - $292.99

    Match-Grad Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • More Detail

    "AIR-GAUGED" PREMIUM BARREL DOUGLAS

    $259.99 - $324.99$259.99 - $324.99

    XX Grade; Hand-Selected For Uniformity To Within .0001"Every barrel is precision, instrument-inspected for absolute straightness and, air gauged for maximum uniformity to yield the greatest accuracy possible. Land and groove tolerance from breech to muzzle can vary only .0001". Only a barrel that meets these demanding criteria wears the XX Premium stamp. Big Book Catalog, Issue:69, Page:167

    HOT!
  • CONTOUR #1 BARREL SHILEN More Detail

    CONTOUR #1 BARREL SHILEN

    $191.99$191.99

    Contour #1 in Chrome Moly All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003". No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:69, Page:166

    HOT!
  • .17 CALIBER CENTERFIRE & .920 More Detail

    .17 CALIBER CENTERFIRE & .920" RIMFIRE BARREL BLANKS SHILEN

    $271.99$271.99

    Provide Outstanding PerformanceExpertly-crafted, steel barrel blanks are button rifled for extremely-close, inside uniformity from breech to muzzle. Adherence to groove- and uniformity-tolerances of .0005” and .0003” respectively, guarantees these barrel’s accuracy. Stress-relieved for ultimate strength and durability. Rimfire blanks are .920” diameter; centerfire are 1.250”. Available in Chrome Moly and Stainless Steel. Big Book Catalog, Issue:69, Page:165

    HOT!
  • DOUGLAS PISTOL BARREL DOUGLAS More Detail

    DOUGLAS PISTOL BARREL DOUGLAS

    $209.99 - $219.99$209.99 - $219.99

    .38/.357 Blanks In 1-10 & 1-14 Twist, Plus .44 & .45Famous Douglas Double XX premium quality blanks in the two most popular twist rates for PPC and other precision shooting. 1-14 duplicates the Python twist rate that is given much of the credit for the Colt's accuracy. 1-10 rate gives superb accuracy with 148 grain wadcutters and the heavier bullets needed to keep the .357 competitive in silhouette. Big Book Catalog, Issue:69, Page:232

    HOT!
  • CONTOUR #7 DOUGLAS More Detail

    CONTOUR #7 DOUGLAS

    $239.99 - $304.99$239.99 - $304.99

    Match-Grade Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • CONTOUR #1 DOUGLAS More Detail

    CONTOUR #1 DOUGLAS

    $245.00 - $245.99$245.00 - $245.99

    Match-Grad Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!
  • CONTOUR #8 DOUGLAS More Detail

    CONTOUR #8 DOUGLAS

    $254.99$254.99

    Match-Grade Barrel Blanks From U.S.'s Oldest Barrel MakerFamous, Douglas Double XX, premium-grade barrels are an excellent choice for any rebarrelling project. Proven accuracy and finest care in manufacture. Button rifled for unequalled smoothness with tolerances for groove diameter and straightness held to .0005". .22 through .338 barrels feature 6- grooves while the .358, .375 and .458 barrels have 8. No straightening is done and all barrels are stress relieved. Big Book Catalog, Issue:69, Page:167

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!