• KAK SHOCKWAVE PISTOL BRACE PACKAGE KAK INDUSTRY LLC. More Detail

    KAK SHOCKWAVE PISTOL BRACE PACKAGE KAK INDUSTRY LLC.

    $95.00$95.00

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture. Features: Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in black and flat dark earth (this listing is for black) Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold Made in U.S.A. Includes: Shockwave Blade Pistol Stabilizer KAK Shockwave Tube Castle Nut Mil-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer  

    HOT!
  • KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS More Detail

    KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS

    $364.99$364.99

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. INCLUDES Shockwave Blade Pistol Stabilizer-Black KAK Shockwave Tube Castle Nut MIL-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer Law Tactical Folding Stock Adapter  

    HOT!
  • AR-15 PISTOL STABILIZING ARM BRACE SIG SAUER More Detail

    AR-15 PISTOL STABILIZING ARM BRACE SIG SAUER

    $139.99$139.99

    SIG SAUER® offers this SB15 Pistol Stabilizing Brace, a shooter’s aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. Made from high-quality, elasto-polymer, the SB15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user. ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply. AR-15, Issue:11, Page:047 Big Book Catalog, Issue:69, Page:046

    HOT!
  • AR-15/M16 PISTOL BUFFER TUBE PHASE 5 TACTICAL More Detail

    AR-15/M16 PISTOL BUFFER TUBE PHASE 5 TACTICAL

    $49.95 - $69.99$49.95 - $69.99

    Foam-Covered Tube For A Custom AR-Style Pistol Machined aluminum buffer tube assembly gives your AR-style pistol a neat, finished look. Nitrile foam rest padding resists chemicals, abrasions and temperatures from -20° F to 220° F. Includes mil-spec endplate and castle nut; accepts a mil-spec carbine buffer and spring. All NFA rules apply. AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040

    HOT!
  • AR-15 PISTOL STABILIZING ARM BRACE KIT SIG SAUER More Detail

    AR-15 PISTOL STABILIZING ARM BRACE KIT SIG SAUER

    $185.99$185.99

    SIG SAUER® offers this SB15 Pistol Stabilizing Brace, a shooter’s aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. Made from high-quality, elasto-polymer, the SB15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user. The BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, the kit also includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate. ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply.  

    HOT!
  • AR-15/M16 HEX 2 PISTOL BUFFER TUBES PHASE 5 TACTICAL More Detail

    AR-15/M16 HEX 2 PISTOL BUFFER TUBES PHASE 5 TACTICAL

    $59.99 - $79.99$59.99 - $79.99

    The Phase 5 Hex 2 pistol buffer tube has been specifically designed to utilize the Sig Sauer SB15 Pistol Stabilizing Brace. The Hex-2 is a heavy duty USA certified 7075 T7 billet aluminum pistol buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately). Working closely with Sig Sauer the Phase 5 Hex-2 was a special project that involved a number of firearms instructors, law enforcement professionals and AR Pistol enthusiasts alike. While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2 has become the perfect component for any AR pistol build. Both the Hex 2 pistol buffer tube and Hex2 pistol buffer tube kit include a castle nut, end plate and foam pad. The Hex 2 pistol buffer tube kit also includes a Phase 5 Enhanced Buffer Spring and carbine buffer.  AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040

    HOT!
  • AR-15/M16 PISTOL BUFFER TUBES MIDWEST INDUSTRIES, INC. More Detail

    AR-15/M16 PISTOL BUFFER TUBES MIDWEST INDUSTRIES, INC.

    $44.99 - $74.99$44.99 - $74.99

    Fits Flush With Rear Of Brace Constructed of 6061 aluminum, these tubes are designed to be used as a stand-alone buffer tube or with the Sig Sauer SB15 Pistol Brace. Tube is proper length to fit flush with the end of pistol brace. A machined shoulder on tube keeps the brace from shifting forward. Tube has Mil-Spec diameter behind the threads and will accept a variety of end plates. Kit includes tube, lock ring, end plate, buffer spring and buffer.

    HOT!
  • AR/AK ENHANCED PISTOL CHEEK REST KIT W/ MFT SADDLE THORDSEN CUSTOMS LLC More Detail

    AR/AK ENHANCED PISTOL CHEEK REST KIT W/ MFT SADDLE THORDSEN CUSTOMS LLC

    $84.99$84.99

    This kit is a Hybrid design utilizing our Enhanced Buffer Tube Cover kits and the Mission First Tactical EVOLV Battle Stock Attachment. The MFT EVOLV, and Buffer Tube Cover, are now pre-assembled in house, and mounted directly to the buffer tube using a specially designed steel bracket and adapter kit. The result is a rock solid, ergonomic cheek weld that provides stability for accurate, repeatable shooting, and a proper sight line for your favorite optics or sights. COMPATIBILITY: Mounts directly to any pistol, or pistol adapter, that accepts an AR-15 buffer tube/receiver extension. (1 3/16" threads) Some Receiver End plates with QD or loop sling attachment points on the back of the end plate may cause interference with the buffer tube cover when used with keyed buffer tubes. Extended length buffer tubes are compatible with all styles of endplate. FEATURES: Provides ergonomic cheek weld 2 Quick Detach Sling hard points (Enhanced Pistol Cheek Rest Kit only) 2 water tight rubber battery storage compartments SPECIFICATIONS: Steel mounting bracket Width: 3.5" Height: 2.5" Length 7.5" to 9.5" (installed length depending on buffer tube used) Weight: 14.5 oz. to 15.75 oz. RECOMENDED INSTALATION TOOLS: AR-15 Armorer's tool or carbine stock wrench (not included) 8mm socket or adjustable end wrench (not included) (2) 1/16" Hex wrenches (included)  Made in USA

    HOT!
  • AR-15 PISTOL SBX STABILIZING ARM BRACE SIG SAUER More Detail

    AR-15 PISTOL SBX STABILIZING ARM BRACE SIG SAUER

    $167.99$167.99

    SIG SAUER offers the SBX Pistol Stabilizing Brace, an second generation to the SB15 Pistol Stabilizing brace, a shooter's aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. The SBX features a more slim design with a thicker strap for extra stability. This veteran-designed accessory enhances accuracy and reduces felt recoil when using an AR-style pistol. Made from high-quality, elasto-polymer, the SBX15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SBX15 to be custom fit to any user. ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply.

    HOT!
  • AR-15 PISTOL STABILIZING ARM BRACE KIT SIG SAUER More Detail

    AR-15 PISTOL STABILIZING ARM BRACE KIT SIG SAUER

    $230.99$230.99

    The Pistol Stabilizing Brace Kit uses the operator's forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SB15 to be custom fit to any user. Kit includes Phase 5 Hex Tube, Action spring and locking nut. Big Book Catalog, Issue:69, Page:046

    HOT!
  • 1911 More Detail

    1911 "GROUP GRIPPER" GUIDE ROD & PLUG WILSON COMBAT

    $47.99$47.99

    Easy, Drop-In Kit Squeezes Maximum Accuracy From Standard BarrelsExclusive Dwyer Group Gripper acts like an instant accurizing job for standard or factory barreled guns. Full-length guide rod with heavy, internal spring forces barrel top lugs upward into the slide. Gives maximum lug engagement, positive lockup and far more consistent shot-to-shot repeatablility. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:016

    HOT!
  • PISTOL RECEIVER EXTENSION KIT BRAVO COMPANY More Detail

    PISTOL RECEIVER EXTENSION KIT BRAVO COMPANY

    $57.99$57.99

    The BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, the kit also includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate. AR-15, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:040

    HOT!
  • AR-15 GEN 3 FOLDING STOCK ADAPTER W/PISTOL BUFFER TUBE BROWNELLS More Detail

    AR-15 GEN 3 FOLDING STOCK ADAPTER W/PISTOL BUFFER TUBE BROWNELLS

    $339.98$339.98

    Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. Paired with a machined aluminum buffer tube assembly gives your AR-style pistol a neat, finished look. Nitrile foam rest padding resists chemicals, abrasions and temperatures from -20° F to 220° F. Includes mil-spec endplate and castle nut; accepts a mil-spec carbine buffer and spring. All NFA rules apply.

    HOT!
  • RECOIL SPACER SMITH & WESSON More Detail

    RECOIL SPACER SMITH & WESSON

    $1.93$1.93

    FITS: 22-A, .22; 22-S, .22 Big Book Catalog, Issue:68, Page:664

    HOT!
  • AR-15/M16 PISTOL TUBE KIT DOUBLE STAR More Detail

    AR-15/M16 PISTOL TUBE KIT DOUBLE STAR

    $49.99 - $66.99$49.99 - $66.99

    The ACE Pistol tube Assembly Uses a carbine buffer and spring for the ultimate in reliability. The overall length is only 7” from the back edge of the receiver. Includes: 1.25” ambidextrous sling mount, billet machined gusset (to retain detent and keep extension from unscrewing), special short receiver extension tube, foam overtube (you cut to length), CAR buffer and spring. The DSC Pistol Tube Assembly is primarily the same, however it does not have the outer foam cover, and the tube has the standard end plate.

    HOT!
  • 1911 RECOIL MASTER STI More Detail

    1911 RECOIL MASTER STI

    $95.99 - $163.99$95.99 - $163.99

    Softens Felt Recoil For Smooth Cycling, Reliable Feeding, Fast Sight RecoveryDual-spring, guide rod system gives smooth, gentle slide movement to significantly reduce muzzle flip and felt recoil. Proprietary, tuned springs help control muzzle rise to get you back on target faster. Primary recoil spring absorbs initial slide movement as the secondary spring gently slows and stops the slide. Softens initial chambering impulse to gently strip rounds from magazine. Improves feeding reliability, reduces sensitivity to magazine lip style. Twin-Pack contains one light system and one heavy system. Shooter preference and experience will help determine choice of heavy or light system. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015

    HOT!
  • AR-15 GEN 3 FOLDING STOCK ADAPTER W/PISTOL RECEIVER EXTENSION BROWNELLS More Detail

    AR-15 GEN 3 FOLDING STOCK ADAPTER W/PISTOL RECEIVER EXTENSION BROWNELLS

    $327.98$327.98

    Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. Paired with the BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, the kit also includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate.

    HOT!
  • RECOIL SPRING GUIDE ROD RETAINING RING BROWNING More Detail

    RECOIL SPRING GUIDE ROD RETAINING RING BROWNING

    $2.99$2.99

    FITS: Buck Mark, .22 Big Book Catalog, Issue:68, Page:591

    HOT!
  • MPX SB15 FOLDING STOCK KIT SIG SAUER More Detail

    MPX SB15 FOLDING STOCK KIT SIG SAUER

    $254.99$254.99

    SIG SAUER factory Pistol Stabilizing Brace kit installs easily on your SIG MPX or SIG MCX via the receivers 1913 interface. Available in Black or Flat Dark Earth.

    HOT!
  • 1911 DEFENDER 3   RECOIL SPRING BUSHING COLT More Detail

    1911 DEFENDER 3 RECOIL SPRING BUSHING COLT

    $11.99$11.99

    FITS: 1911 Defender, .45 1911, Issue:09, Page:067 Big Book Catalog, Issue:68, Page:600

    HOT!
  • AR/AK STANDARD PISTOL CHEECK REST KIT W/CAA SADDLE (BLACK) THORDSEN CUSTOMS LLC More Detail

    AR/AK STANDARD PISTOL CHEECK REST KIT W/CAA SADDLE (BLACK) THORDSEN CUSTOMS LLC

    $54.99$54.99

    HOT!
  • AR-15/M16 PISTOL RECEIVER EXTENSION BRAVO COMPANY More Detail

    AR-15/M16 PISTOL RECEIVER EXTENSION BRAVO COMPANY

    $38.99$38.99

    The BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, accepts carbine buffer and action springs. AR-15, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:040

    HOT!
  • 1911 DUAL ACTION BUFFER SPRING SYSTEM EFK FIRE DRAGON More Detail

    1911 DUAL ACTION BUFFER SPRING SYSTEM EFK FIRE DRAGON

    $64.99$64.99

    Softens Felt Recoil, Tames Muzzle Rise & Reduces Frame Wear Dual action, captive-spring system cushions the recoil impulse to reduce gun wear and tame muzzle jump for fast follow-up shots and accurate shot placement. Full-length, stainless steel guide rod fully supports the recoil spring through the entire compression/expansion cycle to provide smoother cycling and improved function. A second, fully enclosed spring in the guide rod acts like a car shock absorber to slow slide velocity and reduce frame impact. Prolongs the life of frame and slide without compromising reliability. ?Available with recoil springs calibrated for Government model in .45 ACP. Easy, drop-in installation requires no alterations to gun. 1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:108 Sinclair, Issue:1A, Page:015

    HOT!
  • RECOIL SPRING PLUNGER, 21A/3032 BERETTA USA More Detail

    RECOIL SPRING PLUNGER, 21A/3032 BERETTA USA

    $1.88$1.88

    FITS: Model 21.22 Big Book Catalog, Issue:68, Page:574

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!