• #2 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #2 MUZZLE BRAKE 22 CALIBER SHREWD

    $59.99$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • AR .308  M11 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M11 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT

    $109.99 - $119.99$109.99 - $119.99

    Superior Recoil Management With Minimal Dust Signature Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023 Sinclair, Issue:5B, Page:249

    HOT!
  • AR-15  MICULEK COMPENSATOR 22 CALIBER DPMS More Detail

    AR-15 MICULEK COMPENSATOR 22 CALIBER DPMS

    $39.99$39.99

    Six-Port Design Directs Blast Away From Shooter BLMIC- Three large baffles with six side ports and no top vents direct muzzle gases to the side, away from the shooter. Effectively counters muzzle rise and recoil, minimizes felt muzzle blast. High volume shooters will appreciate reduced noise and ease of cleaning. Solid bottom minimizes dust printing when shooting prone. Easy installation, secured with the supplied lock-nut. Designed and used by Jerry Miculek.   AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR-15  M4-72 SEVERE-DUTY COMPENSATOR DLC 22 CALIBER PRECISION ARMAMENT More Detail

    AR-15 M4-72 SEVERE-DUTY COMPENSATOR DLC 22 CALIBER PRECISION ARMAMENT

    $89.99$89.99

    Reduces Recoil & Withstands Heat From Automatic Fire Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Requires use of Accu-Washers sold seperately for proper installation. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR .308  M4-72 SEVERE-DUTY BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M4-72 SEVERE-DUTY BRAKE 30 CALIBER PRECISION ARMAMENT

    $99.99$99.99

    Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Requires use of Accu-Washers sold seperately for proper installation.

    HOT!
  • THREAD ADAPTER 1/2-28 TO 5/8-24 PRECISION ARMAMENT More Detail

    THREAD ADAPTER 1/2-28 TO 5/8-24 PRECISION ARMAMENT

    $22.99 - $26.99$22.99 - $26.99

    Ideal for attaching 5/8-24 muzzle brakes, suppressors, or any other alignment critical devices to your AR-15/M16 barrel. Both Internal and external threads are single point cut in same operation to tight UNEF Class-3 tolerances for perfect concentricity and alignment. Compact design moves muzzle device only .100” forward maintaining full thread joint strength. Precision CNC machined from pre-hardened HTSR 400 series stainless steel bar for superior heat and corrosion resistance. Available in an advanced PVD (Physical Vapor Deposition) matte-black finish, offering exceptional durability and corrosion resistance at high temperatures, making it ideal for full auto fire as well as suppressor applications. Also available in a matte stainless finish. Big Book Catalog, Issue:69, Page:172

    HOT!
  • #1 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #1 MUZZLE BRAKE 22 CALIBER SHREWD

    $59.99$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • #3 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #3 MUZZLE BRAKE 22 CALIBER SHREWD

    $59.99$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • AR-15  DRAGON MUZZLE BRAKE 22 CALIBER LANTAC More Detail

    AR-15 DRAGON MUZZLE BRAKE 22 CALIBER LANTAC

    $125.19$125.19

    Enhances Muzzle Control & Reduces Felt Recoil The LANTAC Dragon Muzzle Brake has vertical ports in the primary discharge chamber to counteract muzzle rise, while the Short Energy Pulse system decreases recoil length, preventing stacking of repeating shot energy and enabling fast, accurate follow-up shots. Even with fully automatic fire, the Dragon delivers significant reduced recoil and muzzle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR-15 KX3 FLASH SUPPRESSOR 22 CALIBER NOVESKE RIFLEWORKS LLC More Detail

    AR-15 KX3 FLASH SUPPRESSOR 22 CALIBER NOVESKE RIFLEWORKS LLC

    $125.99$125.99

    Reduces Muzzle Flash & Protects Nearby Personnel From Side Blast Unique design redirects concussion forward to provide better flash suppression than standard A2 suppressor on short-barreled AR-15/M16/M4 rifles and other centerfire gas-operated weapons. Virtually eliminates side blast to protect nearby personnel during CQB, building entries, and when shooting from inside vehicles. Lessens felt recoil and reduces muzzle rise to help keep sights on the target for fast follow up shots and superior recoil management on full-auto assault rifles, especially with barrels 13" or shorter. High-carbon steel with matte black manganese phosphate finish stands up to the heat and pressure of thousands of rounds. Convenient, ¾" wrench flats allow easy installation with the same wrench used to remove factory flash suppressor. Crush washer included. Each unit individually serial numbered for quality control. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR-15 PRECISION GAMMA MUZZLE BRAKES VG6 PRECISION More Detail

    AR-15 PRECISION GAMMA MUZZLE BRAKES VG6 PRECISION

    $79.99$79.99

    The VG6 GAMMA is a muzzle brake and compensator hybrid.  It virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique chamber geometries give it a very soft feel in the shoulder and the gas ports dimensions have been strenuously tested to give the utmost control to the muzzle.   The VG6 GAMMA has been tuned for versatility. While it is perfect for SBR’s and AR pistols the brake has been optimized for 10.5" to 18.5" barrel lengths. The Gamma556 AND 762 will allow you to saturate the target no matter how fast you shoot.

    HOT!
  • AR .308  MICULEK COMPENSATOR 30 CALIBER DPMS More Detail

    AR .308 MICULEK COMPENSATOR 30 CALIBER DPMS

    $59.99$59.99

    308BLMIC- Modeled after the Miculek Compensator for the AR, six opposing side ports direct gasses outward reducing muzzle jump and giving the LR-308's a reduced felt recoil similar to that of an AP4 Carbine. Made of 4140 steel with a manganese phosphated finish, this new compensator measures 15/16" diameter and 2 3/8" length. Thread pitch 5/8-24. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • MUZZLE BRAKE 30 CALIBER VAIS More Detail

    MUZZLE BRAKE 30 CALIBER VAIS

    $94.99 - $109.99$94.99 - $109.99

    An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expansion chambers disperse and redirect gases for effective recoil control, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish. Big Book Catalog, Issue:69, Page:172

    HOT!
  • AR-15 VORTEX G6-A2 FLASH ELIMINATOR 22 CAL SMITH ENTERPRISE More Detail

    AR-15 VORTEX G6-A2 FLASH ELIMINATOR 22 CAL SMITH ENTERPRISE

    $59.99$59.99

    Helical Flutes Dissipate Gas, Hide Muzzle Flash Four, specially angled flutes hide nearly 100% of muzzle flash, even during full-auto fire, by dissipating gas and retaining unburned powder for increased residual burn. Constructed of the same 8620 bar stock steel used in the manufacture of AR-15/M16 bolts and carriers, then case-hardened to provide a high-strength core and tough, outer shell. Special, helix design helps align exiting barrel gas to improve accuracy with all bullet types. Skirt extension conceals gap between barrel shoulder and flash hider on AR-15, M16, and M4 rifles. Grooved base ring allows integration of Blank Firing Attachment (BFA) used by law enforcement trainers, and permits installation of the Smith Enterprise M4DC CQB sound and flash suppressor (available factory direct to USG/LE and FMS customers). Thread-on design requires no washer. Torque to 10 ft. lbs. maximum, self-tightens as weapon is fired. Use M-193, SS-109 (M855), and MK 262 service ammo for highest degree of flash suppression. Can be permanently attached to 14.5" long, M4 barrels for an overall length of 16.1". G6-A2 has smooth exterior. AR-15, Issue:11, Page:025 Big Book Catalog, Issue:69, Page:024 Big Book Catalog, Issue:69, Page:171

    HOT!
  • AR .308  TACTICAL COMPENSATOR 1X2.25 .324 30 CAL J P ENTERPRISES More Detail

    AR .308 TACTICAL COMPENSATOR 1X2.25 .324 30 CAL J P ENTERPRISES

    $85.99$85.99

    JPTRE-324 - JP Tactical Compensator,5/8-24 TPI, .750 Outside diameter, .350 exit. Carbon steel matte black, SOF/Tactical/USPSA Limited legal. JPTRE-324S - JP Tactical Compensator, 5/8-24 TPI, .750 Outside diameter, .350 exit.  tapered to .875 barrel with 5/8 x 24 thread,.350 exit hole for .30 caliber. Stainless. Can be opened up for larger calibers. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR-15  STANDARD TACTICAL COMPENSATOR .750 22 CAL J P ENTERPRISES More Detail

    AR-15 STANDARD TACTICAL COMPENSATOR .750 22 CAL J P ENTERPRISES

    $85.99$85.99

    Efficient Reduction Of Felt Recoil; Legal For Tactical Matches Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR-15  M11-SPR MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT More Detail

    AR-15 M11-SPR MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT

    $104.99$104.99

    Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation. AR-15, Issue:11, Page:025 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR-15 MUZZLE BRAKE Q-COMP WILSON COMBAT More Detail

    AR-15 MUZZLE BRAKE Q-COMP WILSON COMBAT

    $59.95$59.95

    The Wilson Combat Q-Comp has been designed by their compensator experts to greatly enhance recoil control in rapid fire without the harsh blast and flash that other AR-15 muzzle devices exhibit. The Q-Comp is a hybrid Ar-15 brake/compensator that has been tuned to minimize the side-blast and concussion compared to other muzzle devices on the market. The exclusive Wilson Combat design displays almost zero muzzle flash yet retains excellent vertical and rearward recoil reduction with all calibers. The slotted expansion chamber design of the Q-Comp has no prongs or tines to break off or snag and is Melonite QPQ coated alloy steel for maximum durability and corrosion resistance. The Q-Comp is easily installed on your AR rifle, and the included crush washer eliminates the need for a shim kit. ½-28 TPI threads with an internal bore diameter of .375” to work with most 5.56 (standard USGI thread pitch), some 300 BLK and calibers up to 9mm Luger. 5/8-24 TPI threads with an internal bore diameter of .375” for most 6.8, most .300 and .308 rifles, and some 9mm (Wilson AR-9). 11/16-24 TPI threads with an internal bore diameter of .485” for Wilson Combat SOCOM rilfes and some other aftermarket large caliber AR’s.

    HOT!
  • AR .308  M41 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M41 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT

    $109.99 - $119.99$109.99 - $119.99

    Maximum recoil reduction for Long Range Precision Rifles Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Can be modified by a qualified gunsmith to fit larger thread diameters (up to 3/4" or 18mm). Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. M41 Spanner Wrench advised for installation and removal. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023 Sinclair, Issue:5B, Page:249

    HOT!
  • QUICK DISCHARGE BRAKE 30 CALIBER HOLLANDS GUNSMITHING More Detail

    QUICK DISCHARGE BRAKE 30 CALIBER HOLLANDS GUNSMITHING

    $119.99 - $124.99$119.99 - $124.99

    Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.     NOTE: Calibers above 223 the muzzle brake must be drilled out. Big Book Catalog, Issue:69, Page:170

    HOT!
  • AR-15 BLASTOUT MUZZLE DEVICE 51T ADVANCED ARMAMENT More Detail

    AR-15 BLASTOUT MUZZLE DEVICE 51T ADVANCED ARMAMENT

    $144.99$144.99

    The AAC BlastOut 51T is a muzzle accessory designed to improve the modern sporting rifle user experience by significantly reducing blast pressure and concussive forces. The design directs the muzzle blast forward of the shooter. Range neighbors, training partners, and team members lateral of the muzzle benefit by the blast re-direction. BlastOut 51T works on all existing AAC 51-tooth mounts regardless of caliber and device type (flash hider, compensator, or brake). The proven industry-standard 51-tooth mounting system allows for quick and easy one-handed operation. The steel body is designed for hard-use and long-term durability while a nitride finish creates a wear-resistant surface. The BlastOut 51T adds only 6 ounces in weight and negligible overall length. Body Diameter - 1.50". Body Outer Diameter Max at Latch - 1.57". BlastOut 51T is compatible only with 51T mounts. It is not compatible with the SR-series 90T mounts.

    HOT!
  • AR-15  GUNFIGHTER COMP MOD 0 22 CALIBER BRAVO COMPANY More Detail

    AR-15 GUNFIGHTER COMP MOD 0 22 CALIBER BRAVO COMPANY

    $89.99$89.99

    Compensator Reduces Side Blast & Accepts Suppressors The Gunfighter compensator reduces muzzle rise and flash, with a special baffling system that also limits side blast and the noise associated with typical compensators. Exterior dimensioned to accept blank firing adapter or flash hider mounted suppressors. Stainless steel construction and black oxide finish help resist heat and corrosion. Gunsmith installation recommended. Standard Length fits .223/5.56mm rifles. Extended Length models for both .223/5.56 and .308/7.62mm rifles brings 14.5" barrels up to 16". AR-15, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR-15 FLASH HIDER 22 CAL ADVANCED ARMAMENT More Detail

    AR-15 FLASH HIDER 22 CAL ADVANCED ARMAMENT

    $99.99$99.99

    Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA's proprietary SCARmor™ coating that gives high surface hardness for added resistance to blast erosion.  51T models have an integral 51-tooth ratchet mount that accepts Advanced Armament sound suppressors. All models are available in sizes to fit rifles chambered in 5.56mm/.223 (1/2"-28 tpi muzzle threads) AR-15, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:021

    HOT!
  • AR .308  BRAKEOUT 2.0 COMPENSATOR 51T 30 CALIBER ADVANCED ARMAMENT More Detail

    AR .308 BRAKEOUT 2.0 COMPENSATOR 51T 30 CALIBER ADVANCED ARMAMENT

    $109.99$109.99

    The BRAKEOUT® 2.0 is a silencer mounting muzzle device that is both a flash suppressor and muzzle brake in one. The BRAKEOUT® 2.0 offers the best of both worlds in a truly compromise-free design. The BRAKEOUT® 2.0 offers outstanding recoil reduction tested to be fully equal to the best conventional muzzle brakes, along with excellent flash reduction performance. The new symmetrical design of the BRAKEOUT® 2.0 does not need to be timed with shims like a conventional muzzle brake, simplifying installation. The BRAKEOUT® 2.0 is offered as a 51T  Taper variants with 5/8-24 threads. AR-15, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:021

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!