• AK-47/74 UNIVERSAL HANDGUARD MIDWEST INDUSTRIES, INC. More Detail

    AK-47/74 UNIVERSAL HANDGUARD MIDWEST INDUSTRIES, INC.

    $119.99$119.99

    Brings The Versatility Of AR-Style Rail Mounts To Your Kalashnikov High-quality, lightweight, aluminum handguard gives your AK-47 the convenience and versatility of rail mounting for lights, lasers, optics, vertical grips and other accessories. Installs in minutes with no gunsmithing or permanent modifications required. Precision machined from lightweight aluminum alloy, hardcoat anodized for a tough finish that resists surface wear. T-marked MIL-STD 1913 Picatinny rails bring your AK up to speed by accepting a wide range of accessories used on the AR-15/M16 platform. Handguard w/M2 Top Cover allows the use of red dot sights & iron sights. Iron sights will appear in the lower one third. Provides cooler operating environment for optic. Accepts most full size 30mm red dot sights including: Aimpoint COMPML2, Burris Speed Dot, Trijicon Tri-Power., Vortex Strikefire, Primary Arms M3 (will not cowitness). Extended Universal Handguard extends the lower rail to 9.5 inches for additional mounting surface. The Extended Model is available with the standard Picatinny top cover. Big Book Catalog, Issue:69, Page:184

    HOT!
  • AR-15 BCMGUNFIGHTER™ KMR ALPHA KEYMOD FREE FLOAT HANDGUARDS BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ KMR ALPHA KEYMOD FREE FLOAT HANDGUARDS BRAVO COMPANY

    $171.95 - $199.95$171.95 - $199.95

    All the advantages and features of Bravo Company’s KeyMod™ Rail, now available in 100% aluminum. Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut. The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish. The KeyMod™ interface system was developed by Eric Kincel (now the Director of BCMs' product development team) to work in parallel with the current picatinny system. In many applications it will advance modularity past the current 1913 rail system. The BCM KMR Alpha also allows for a larger range of modularity offering 4 different offset mounting positions between traditional 3, 6, 9, and 12:00 positions. In the most basic of applications the KeyMod™ system allows for universal modularity between various manufacturers of accessories, and accessory rails. As the industry advances the modular accessories will mount directly to the KeyMod™ instead of picatinny, allowing for a lighter, cleaner, and less bulky weapon system. Big Book Catalog, Issue:69, Page:048

    HOT!
  • AR-15 DIAMOND PATTERN FREE FLOAT HANDGUARDS YANKEE HILL MACHINE CO., INC. More Detail

    AR-15 DIAMOND PATTERN FREE FLOAT HANDGUARDS YANKEE HILL MACHINE CO., INC.

    $122.70 - $160.70$122.70 - $160.70

    Diamond Shaped Vents For Superior Heat Dissapation Diamond-shaped vents in a unique, latticework pattern give your weapon a distinctive look and provide superb airflow to prevent barrel from overheating. Helps keep your hand cool, too, while reducing weapon's overall weight. Provides four, full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four, full-length Picatinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat anodized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alphanumerically to help identify accessory locations. Threaded front end accepts Yankee Hill screw-in end cap, available separately. Comes with jam nut, barrel nut and anti-rotation screws to ensure handguard stays locked in place. AR-15, Issue:11, Page:054 Big Book Catalog, Issue:69, Page:054

    HOT!
  • AR-15 G3 M-SERIES M-LOK FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC. More Detail

    AR-15 G3 M-SERIES M-LOK FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

    $149.95 - $199.95$149.95 - $199.95

    Professional grade, one piece free float design and construction Simple Installation Lightweight Slim 1.5" OD 7 sides of M-LOK slots Barrel nut and barrel nut wrench included Patent Pending torque plate system 5 anti-rotation QD sling swivel sockets High quality MIL-STD 1913 top rail Constructed of 6061 aluminum, then hard coat anodized Fully dehorned for a non-abrasive, comforatble feel 100% made in the USA Big Book Catalog, Issue:69, Page:051

    HOT!
  • AR-15/M16 MK 8 SUPER MODULAR RAILS, M-LOK GEISSELE AUTOMATICS LLC More Detail

    AR-15/M16 MK 8 SUPER MODULAR RAILS, M-LOK GEISSELE AUTOMATICS LLC

    $225.00 - $438.00$225.00 - $438.00

    Lightweight, Free-Floating Modular Handguard Ergonomic, lightweight modular rail system offers plenty of M-LOK attachment points along the entire length. Single piece assembly is machined from a semi-billet extrusion of aircraft grade aluminum for enhanced strength and performance to weight ratio. Free floating handguard attaches via long barrel nut machined from aircraft grade aluminum with a hardcoat anodized surface. Handguard fits tightly on the barrel nut and clamps securely by two cross bolt. M-LOK technology allows shooter to place accessory rails anywhere along the length of the rail in 45° intervals. Handguard has two standard, non-rotating QD slots on either side. The rails include a .750" low profile stainless steel Geissele Gas Block.

    HOT!
  • AR-15 ALPHA RAIL HANDGUARDS TROY INDUSTRIES, INC. More Detail

    AR-15 ALPHA RAIL HANDGUARDS TROY INDUSTRIES, INC.

    $159.99 - $209.00$159.99 - $209.00

    Easy-To-Align Free-Float Handguards; Fixed Quad-Rail & User-Configurable Models Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional ventilation holes to reduce weight and dissipate heat. Come with three bolt-on rails for mounting additional accessories exactly where you need them. Alpha models fit standard factory AR-15/M16 barrel nut. AR-15, Issue:11, Page:053 Big Book Catalog, Issue:69, Page:052

    HOT!
  • AR-15/M16 MOE M-LOK CARBINE HANDGUARDS MAGPUL More Detail

    AR-15/M16 MOE M-LOK CARBINE HANDGUARDS MAGPUL

    $28.45$28.45

    These Magpul MOE M-LOK Handguards are built for carbine length AR-15/M16 firearms. The MOE M-LOK Handguards are built with the same strong, yet lightweight polymer as the legacy MOE Handguards, but come with M-LOK slots at the two, six, and ten o’clock positions. The M-LOK system allows for the attachment of optional M-LOK rail sections and other M-LOK accessories such as light mounts, slings, foregrips, etc. AR-15, Issue:11, Page:050 Big Book Catalog, Issue:69, Page:050

    HOT!
  • AR-15/M16 FREE FLOAT RAS KNIGHTS ARMAMENT More Detail

    AR-15/M16 FREE FLOAT RAS KNIGHTS ARMAMENT

    $351.39$351.39

    The KAC Free Float Rifle RAS has been in service with a variety of military units, proving itself as one of the most versatile and rugged handguards available.  The RAS (Rail Adapter System) features full length mil-spec M1913 Picatinny rails at the 12-, 3-, 6-, and 9 o’clock positions, making it compatible with any number of rail-mounted tactical accessories. The rail free floats the barrel, allowing for consistent barrel harmonics upon firing, and thus increased accuracy potential. Includes three KAC 11 Rib Rail Panels. This Free Float RAS requires that the rifle have a carbine or mid length gas system and a low profile gas block. Disassembly of the rifle’s gas system and removal of the factory barrel nut will be necessary. This forend uses a proprietary barrel nut that may be installed using a standard AR-15 armorer’s barrel nut wrench (sold separately). For AR-15/SR-15 based platforms only; not compatible with SR-25 variants. Installation instructions are included. Big Book Catalog, Issue:69, Page:050

    HOT!
  • AR-15 G3 M-SERIES M-LOK FREE FLOAT HANDGUARDS FDE MIDWEST INDUSTRIES, INC. More Detail

    AR-15 G3 M-SERIES M-LOK FREE FLOAT HANDGUARDS FDE MIDWEST INDUSTRIES, INC.

    $149.95 - $199.95$149.95 - $199.95

    Professional grade, one piece free float design and construction Simple Installation Lightweight Slim 1.5" OD 7 sides of M-LOK slots Barrel nut and barrel nut wrench included Patent Pending torque plate system 5 anti-rotation QD sling swivel sockets High quality MIL-STD 1913 top rail Constructed of 6061 aluminum, then hard coat anodized Fully dehorned for a non-abrasive, comforatble feel 100% made in the USA Big Book Catalog, Issue:69, Page:051

    HOT!
  • AR-15 GEN II SS SERIES FREE FLOAT HANDGUARD MIDWEST INDUSTRIES, INC. More Detail

    AR-15 GEN II SS SERIES FREE FLOAT HANDGUARD MIDWEST INDUSTRIES, INC.

    $139.95 - $149.75$139.95 - $149.75

    Machined aluminum free-float handguard offers many of the same features as the original SS Series handguards, with less weight and a slimmer profile. Only 1-1/2" wide, the Gen 2 models include a bipod stud and three bolt-on 2-1/2" rail sections, one with a built-in anti-rotation QD socket, that can be mounted anywhere. Included barrel nut and barrel nut wrench enable easy mounting. Accepts Gen 2 SS-Series  accessories only, no original SS accessories. 7" Carbine and 9" Mid-length models leave the gas block exposed. 10" Carbine, 12" and 15" Rifle models require low-profile gas blocks. AR-15, Issue:11, Page:052 Big Book Catalog, Issue:69, Page:052

    HOT!
  • AR-15/M16 MK 4 SUPER MODULAR RAILS, M-LOK GEISSELE AUTOMATICS LLC More Detail

    AR-15/M16 MK 4 SUPER MODULAR RAILS, M-LOK GEISSELE AUTOMATICS LLC

    $225.00 - $300.00$225.00 - $300.00

    The Super Modular Rail MK4 M-LOK™ is Geissele’s ultra-lightweight M-LOK option. These rails are purpose-built and feature integrated M1913 picatinny rail sections at the fore of the rail in the 3, 6 and 9 o’clock positions. Maximum venting for heat dissipation also dramatically reduces the rails overall weight, while maintaining its same strong and rigid platform. The MK4 M-LOK rail features M-LOK slots at the 3, 6 and 9 o’clock positions as well as the upper 45° quadrants. This allows the user to keep the weight on the rail system down, while keeping the modularity and versatility to attach accessories as necessary.The rails include a .750" low profile stainless steel Geissele Gas Block.

    HOT!
  • AR-15 ERGONOMIC MODULAR RAIL V2 ALG DEFENSE More Detail

    AR-15 ERGONOMIC MODULAR RAIL V2 ALG DEFENSE

    $145.00 - $165.00$145.00 - $165.00

    The Ergonomic Modular Rail V2 with Magpul M-LOK support, allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o’clock positions. The EMR V2 M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o’clock positions. The primary difference between the EMR V2 and V1 is that the V2 has a machined M1913 picatinny rail section at the muzzle end of the rail at the 12’ o’clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913 compatible accessory.   Current infantry doctrine makes extensive use of accessories that require attachment to a weapon rail. Flashlights, visible and infrared lasers, night vision and thermal sights, all require a rigid weapon rail so that zero is not changed when a bipod or sling is used to support the weapon from the rail. The ALG EMR is a rigid interface for weapon accessories due to its precisely machined proprietary barrel nut and secure rail interface and clamping arrangement. The weapon barrel is completely free floating when an ALG EMR is mounted. No force is put into the barrel from slings or bipods that could affect point of aim.  The ALG EMR is machined from a 6061-T6 extrusion, made from aircraft grade aluminum.  Use of extruded 6061-T6 aircraft grade aluminum in an ALG EMR give the entire assembly a good strength and performance to weight ratio. Each ALG EMR comes with a precision machined, 2” long barrel nut that is machined from aircraft grade 7075-T6 aluminum and hardcoat anodized for a durable surface. The ALG EMR barrel nut is required to be indexed to the gas tube, and includes all of the necessary shim kits and instructions to do so. Then the rail is slid onto the barrel nut with a fit that precisely aligns the rail to the barrel. After indexing the rail to the receiver, six mounting bolts are tightened and the rail is secure. Just by removing six screws the ALG EMR can be slid off the barrel nut for cleaning or gas system maintenance. As quick as it is removed the ALG EMR is can be re-installed with the precise barrel nut to rail fit maintaining sight and accessory zero. Notice: The ALG EMR barrel nut wrench is no longer included with rails and can be purchased separately. AR-15, Issue:11, Page:049 Big Book Catalog, Issue:69, Page:048

    HOT!
  • SP SERIES HANDGUARDS, M-LOK MIDWEST INDUSTRIES, INC. More Detail

    SP SERIES HANDGUARDS, M-LOK MIDWEST INDUSTRIES, INC.

    $139.95 - $174.95$139.95 - $174.95

    Extremely rugged, one piece free float design and construction Features seven sides of M-LOK compatible slots Inside Diameter is 1.75" Outside Diameter is 2.0" High qualtity MIL-STD 1913 top rail T-Marked for accessory location One five slot M-LOK polymer rail section included Barrel nut wrench included Constructed from 6061 aluminum and hard coat anodized for a life of service 100& Made in the USA

    HOT!
  • NOXS HANDGUARDS, KEYMOD SEEKINS PRECISION More Detail

    NOXS HANDGUARDS, KEYMOD SEEKINS PRECISION

    $151.00 - $170.00$151.00 - $170.00

    The NOXs™ handguard was designed as an alternative to the outdated, bulky options of the past. Engineered as a lightweight, ultra-thin platform, the NOXs™ handguard is only 1.5” wide. Each NOXs™ handguard will be available with the KeyMod mounting system at the 3, 6 and 9 o’clock positions throughout the length of the rail, allowing the user to customize their platform with accessories as needed. Anti-rotation QD sling attachment points are milled directly into the hand guard, as are cooling slots, providing maximum airflow and preventing the barrel from overheating during prolonged periods of shooting.   The NOXs™ handguard comes equipped with a Patent Pending Cross-lok™ mounting system. This system ensures that anti-rotation is built into the steel barrel nut as well as the handguard making installation simple and rock solid with just basic hand tools. The NOXs™ handguards are Type III Hardcoat Anodized, matte black and available in 9, 12.8” or 15” lengths for the AR-15 Platform. As with all Seekins Precision handguards the NOXs™ ships with all of the needed hardware to mount to a standard upper receiver.   Width 1.50”; Inside diameter 1.350”  9” Handguard: Overall length 9.125”  6.1 Ounces  12” Handguard:  Overall length 12.875”  8.0 ounces  15” Handguard:  Overall length 15.0”  9.2 Ounces Barrel nut and mounting hardware: 2.6 ounces.

    HOT!
  • AR-15 G3 K-SERIES KEYMOD FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC. More Detail

    AR-15 G3 K-SERIES KEYMOD FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

    $174.95 - $219.95$174.95 - $219.95

    Professional grade, one piece free float design and construction Simple Installation Lightweight Construction Slim 1.5" OD 7 Sides of Keymod Slots Barrel nut and barrel wrench included Patent pending torque plate system 5 anti-rotation QD sling swivel sockets High quality MIL-STD 1913 top rail Constructed  of 6061 aluminum, then hard coat anodized Fully dehorned for a non-abrasive, comfortable feel 100% made in the USA Big Book Catalog, Issue:69, Page:051

    HOT!
  • AR-15 FREE FLOAT HANDGUARDS DOUBLE STAR More Detail

    AR-15 FREE FLOAT HANDGUARDS DOUBLE STAR

    $44.99 - $64.99$44.99 - $64.99

    Includes Barrel Nut For Fast Installation Machined aluminum handguard mounts onto your AR-15 and free floats the barrel to relieve stress and help enhance accuracy potential. Fits all standard size uppers and includes barrel nut for fast and easy installation. Accepts standard barrel nut wrenches and features knurled center section for secure grip. Rifle handguard has 5 longitudinal flutes to save weight, and 10 slots cut in the muzzle end to help improve air flow and help speed cooling. Carbine handguard has 8 longitudinal flutes to save weight. Pistol handguard has no flutes or slots. AR-15, Issue:11, Page:049 Big Book Catalog, Issue:69, Page:048

    HOT!
  • NOXS HANDGUARDS, M-LOK SEEKINS PRECISION More Detail

    NOXS HANDGUARDS, M-LOK SEEKINS PRECISION

    $151.00 - $170.00$151.00 - $170.00

    The NOXs™ handguard was designed as an alternative to the outdated, bulky options of the past. Engineered as a lightweight, ultra-thin platform, the NOXs™ handguard is only 1.5” wide. Each NOXs™ handguard will be available with the M-LOK mounting system at the 3, 6 and 9 o’clock positions throughout the length of the rail, allowing the user to customize their platform with accessories as needed. Anti-rotation QD sling attachment points are milled directly into the hand guard, as are cooling slots, providing maximum airflow and preventing the barrel from overheating during prolonged periods of shooting.   The NOXs™ handguard comes equipped with a Patent Pending Cross-lok™ mounting system. This system ensures that anti-rotation is built into the steel barrel nut as well as the handguard making installation simple and rock solid with just basic hand tools. The NOXs™ handguards are Type III Hardcoat Anodized, matte black and available in 9, 12.8” or 15” lengths for the AR-15 Platform. As with all Seekins Precision handguards the NOXs™ ships with all of the needed hardware to mount to a standard upper receiver.   Width 1.50”; Inside diameter 1.350”  9” Handguard:  Overall length 9.125”  6.1 Ounces 12” Handguard:  Overall length 12.875”  8.0 ounces 15” Handguard:  Overall length 15.0”  9.2 Ounces Barrel nut and mounting hardware: 2.6 ounces.

    HOT!
  • SCAR MREX M-LOK 6.5 More Detail

    SCAR MREX M-LOK 6.5" RAIL EXTENSIONS KINETIC DEVELOPMENT GROUP LLC

    $299.00$299.00

    The Kinetic MREX™ Receiver extension provides the solution you’ve been searching for with your SCAR rifle platform. The MREX™ was designed to be a simple, durable, and lightweight. By utilizing a one piece design, the MREX™ maintains extreme durability. The MREX™ also allows for removal of the barrel with the extension still attached, allowing users to still change out there barrel assembly in just a few screws. The overall design puts modularity in the places you want it and need it and nowhere else; while reducing the profile of the factory SCAR platform. There is no better solution to add to your SCAR. Works on all 7.62 and 5.56 SCAR models w/ 16″ or longer barrels Black Anodized or FDE Cerakote Magpul MLOK™ Modular Design ADDS ONLY 3.7oz to the weight of your SCAR! Improved rifle balance and weight distribution 6.5″ added modular rail space from front of SCAR receiver, for use with any SCAR L & H barrel configurations. (certain Flash hiders and certain suppressors will not fit.) 2x Uncle Mikes QD Mounting Points Installation still allows for quick change barrel. Full kit includes 2 MAGPUL MLOK™ polymer accessory rails, installation torx wrenches, torx screws and vibratite

    HOT!
  • AR-15/M16 G3 FREE FLOAT K-SERIES KEYMOD HANDGUARDS, FDE MIDWEST INDUSTRIES, INC. More Detail

    AR-15/M16 G3 FREE FLOAT K-SERIES KEYMOD HANDGUARDS, FDE MIDWEST INDUSTRIES, INC.

    $174.95 - $219.95$174.95 - $219.95

    Professional grade, one piece free float design and construction Simple Installation Lightweight Construction Slim 1.5" OD 7 Sides of Keymod Slots Barrel nut and barrel wrench included Patent pending torque plate system 5 anti-rotation QD sling swivel sockets High quality MIL-STD 1913 top rail Constructed  of 6061 aluminum, then hard coat anodized Fully dehorned for a non-abrasive, comfortable feel 100% made in the USA Big Book Catalog, Issue:69, Page:051

    HOT!
  • AR-15/M16 GEN 2 T-SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC. More Detail

    AR-15/M16 GEN 2 T-SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

    $209.95$209.95

    Enhances Accuracy Potential & Optimizes Mounting & Sling Attachments Machined aluminum handguard is similar to original T-Series handguard, but with a slimmer profile, lighter weight and QD swivel sockets for easy sling attachment. Attaches directly to the upper receiver with included proprietary barrel nut and eliminates pressure points on the barrel that can compromise accuracy. MIL-STD 1913 rails are T-marked for accessory location and fully dehorned for a smooth, non-abrasive feel. Large vent holes keep weight down and provide plenty of air circulation to help cooling. Accommodates most gas piston systems, and includes barrel nut wrench, hardware and retaining compound. May not fit some rifles with permanently attached muzzle devices such as pinned or welded flash hiders. Minor gunsmithing required. AR-15, Issue:11, Page:052 Big Book Catalog, Issue:69, Page:052

    HOT!
  • AR-15/M16 2-PIECE HANDGUARD YANKEE HILL MACHINE CO., INC. More Detail

    AR-15/M16 2-PIECE HANDGUARD YANKEE HILL MACHINE CO., INC.

    $138.30 - $181.80$138.30 - $181.80

    Models For Extreme Tactical Duty Tough, 2-piece, forearm uses your existing delta ring, so it’s easy to replace the standard issue, mil-spec handguard with a strong, lightweight aluminum version. Four, fixed, Picatinny rails provide a solid mounting platform for backup sights, lasers, tactical lights, vertical grips and more. Oversize cooling ports prevent heat buildup and allow clear view of the barrel section underneath for a radical, tactical look. Bottom panel removes easily to provide clearance for grenade and flare launchers if needed. Drilled and tapped in four locations to accept the Yankee Hill Threaded Swivel Stud. Use Colts Carbine model on Colt-manufactured guns. AR-15, Issue:11, Page:054 Big Book Catalog, Issue:69, Page:054

    HOT!
  • AR-15 EVOLUTION RAILS SAMSON MANUFACTURING CORP More Detail

    AR-15 EVOLUTION RAILS SAMSON MANUFACTURING CORP

    $139.99 - $189.99$139.99 - $189.99

    Light weight and durable, perfect upgrade for 3 gun shooters, Law Enforcement/Militay, or weekend enthusiasts 1.8" facetted OD offers a comfortable shooting platform Accessory rails can be added or removed easily to adapt the handguard to your needs Thermal bushing locks onto the stock barrel nut No special tools required for install Inside diameter is large enough to fit most suppressors (1.56") Continuous mil spec top rail Duel anti rotation tabs Relieved for most gas piston systems Thermal bushing helps reduce heat transfer to handguard Supplied with 2x2" rail kits and 1x4" rail kit Tube material: 6010 t6 Bushing material: 303 stainless Mil spec hard coat anodized Big Book Catalog, Issue:69, Page:053

    HOT!
  • 308 AR M-LOK SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC. More Detail

    308 AR M-LOK SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

    $199.95 - $209.95$199.95 - $209.95

    Super slim 1.75 inch outside diameter Incredibly lightweight design High quality MIL-STD 1913 top rail, T-marked for accessory location Constructed from 6061 aluminum, hard coat anodized for a lifetime of service Five anti-rotation QD swivels Includes one M-LOK rail section Fully dehorned for a non-abrasive, comfortable feel Barrel Nut and Barrel Nut Wrench included Some minor gunsmithing required Big Book Catalog, Issue:69, Page:051

    HOT!
  • AR-15/M16 TWO-PIECE FOREND MIDWEST INDUSTRIES, INC. More Detail

    AR-15/M16 TWO-PIECE FOREND MIDWEST INDUSTRIES, INC.

    $124.95$124.95

    Versatile, Easy To Install, Snap-On Forend Rails For Optics & Accessories Carbine length, two-piece vented forearm snaps solidly in place and replaces factory plastic handguard with no gunsmithing, no permanent alterations to rifle. Each of the four MIL-STD 1913 Picatinny rails contains 15 mounting slots for optics, lasers, vertical grips, bipods, and lights. Two-piece design permits removal of lower section to install a grenade launcher or shotgun. Both pieces remove easily for cleaning and maintenance. Rails are laser etched with white alphanumeric position markings to aid in fast mounting and remounting of optics and accessories. Large vent holes allow plenty of air circulation for barrel. Models available to fit standard AR-15/M4 carbine. AR-15, Issue:11, Page:051 Big Book Catalog, Issue:69, Page:051

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!