• ALL PURPOSE CLEANING BRUSHES OTIS More Detail

    ALL PURPOSE CLEANING BRUSHES OTIS

    $3.99 - $10.99$3.99 - $10.99

    Have The Right Brush On Hand For The Toughest Cleaning JobNylon, bronze or stainless steel bristles means you will always have the correct brush on hand even for the toughest cleaning requirement. Flexible, double-ended design is best around in the shop; can be put to dozens of uses cleaning, polishing and restoring. Blue or white nylon takes care of fresh carbon or powder residue inside or out but won’t scratch your firearm’s finish. Extra-gentle white nylon is also perfect for cleaning delicate wood surfaces. Bronze cleans more stubborn residue on metal surfaces that require more aggressive scrubbing action like inside slides, receivers or locking lugs. Stainless steel is best for aggressive cleaning of fouling other brushes won’t touch. Use stainless steel on interior surfaces only because it will scratch and mark most gun steels and finishes. AR-15, Issue:04, Page:072 Big Book Catalog, Issue:69, Page:341 Sinclair, Issue:4X, Page:002

    HOT!
  • GUN/PARTS CLEANING BRUSH BROWNELLS More Detail

    GUN/PARTS CLEANING BRUSH BROWNELLS

    $3.99 - $20.99$3.99 - $20.99

    Military-Approved, Double-Ended Cleaning Power For Guns & PartsDeveloped for the U.S. Armed Forces to clean M16/M4 rifles quickly and effectively and get them back into action. Double-ended, solvent-proof, polypropylene handle provides a large, contoured series of nylon bristles to cover curves and open areas, while the short, extra-stiff, narrow line of bristles tackles the really tough crud in those hard to reach areas. Gets down inside actions, pistol slides, around the extractor star on revolver cylinders, plus provides superior scrubbing action for individual parts and hard-to-reach areas on shop machinery. Enough bristle backbone to remove greasy gun dirt, yet won’t scratch delicate blued surfaces. We’ve used them with d’Solve™, EZ-Soak™, WD-40, Hoppes bore cleaners, and a host of other solvents and oils on everything from fine custom rifles to neglected, black powder guns. An exceptionally good, practical, cleaning brush for use at the bench or in the field. AR-15, Issue:11, Page:081 Big Book Catalog, Issue:69, Page:078 Big Book Catalog, Issue:69, Page:340 Big Book Catalog, Issue:69, Page:474 Big Book Catalog, Issue:69, Page:485

    HOT!
  • SUPER TOOTHBRUSHES BROWNELLS More Detail

    SUPER TOOTHBRUSHES BROWNELLS

    $2.99 - $13.99$2.99 - $13.99

    Toothbrush Style Built Just For Cleaning & ScrubbingMatch the bristle to the job with choice of Stainless Steel, Bronze or Nylon bristle. Grooved handle for positive grip. Big Book Catalog, Issue:69, Page:340

    HOT!
  • HOPPE'S UTILITY BRUSH HOPPES More Detail

    HOPPE'S UTILITY BRUSH HOPPES

    $2.99$2.99

    Bronze Bristles For Hard ScrubbingDouble-ended brush with phosphor bronze bristles really gets in there and scrubs out fouling. Fits into action recesses and other hard-to-reach areas. Large end is toothbrush style, small end has single row of short bristles. Works great on small parts, or anywhere tough scrubbing is necessary. Big Book Catalog, Issue:69, Page:340

    HOT!
  • HEAVY-DUTY GUNSMITH BRUSHES BROWNELLS More Detail

    HEAVY-DUTY GUNSMITH BRUSHES BROWNELLS

    $3.99 - $23.99$3.99 - $23.99

    Stainless Steel, Brass Or Nylon Bristles Stitched-In Wood HandleOur finest, small cleaning brushes. Stainless steel stitching laced all the way through the handle keeps the bristles in place and prevents pull-out under even the heaviest use. Made for the aircraft industry to exceed mil specs so you know they'll last in the gun shop too. Handle is 7-ply, no split laminate that stands up to all solvents and hard scrubbing. Available in three bristle materials to suit any job. Stainless Steel (C) - Crimped wire that holds its shape well. Fantastic for parts washing and also an excellent choice for removing welding scale in tight corners (like bolt knob jobs!). Stainless Steel (S) - Straight wire that gives a slightly softer scrubbing action but still holds its shape even with repeated use. Excellent for scrubbing and degreasing parts in solvent prior to polishing and refinishing. Brass - Straight wire for a more gentle action that still gets through built-up grease, oils and fouling. Nylon - Tough, black nylon provides no- scratch cleaning of surfaces and recesses. Big Book Catalog, Issue:69, Page:340

    HOT!
  • AR-15/M16 ELIMINATOR™ AR-15 BRUSH PAK IOSSO PRODUCTS More Detail

    AR-15/M16 ELIMINATOR™ AR-15 BRUSH PAK IOSSO PRODUCTS

    $14.99$14.99

    Dense, durable Nyflex™ fiber brushes offer maximum bristle area per square inch to thoroughly clean specific parts of the weapon without risk of scratching bore or the aluminum components. Includes brushes for .223/5.56mm bore, upper receiver, chamber, and bolt carrier. AR-15, Issue:11, Page:078 Big Book Catalog, Issue:69, Page:076 Sinclair, Issue:5B, Page:158

    HOT!
  • BRUSHSMITH™ CLEANING BRUSHES RIGEL PRODUCTS More Detail

    BRUSHSMITH™ CLEANING BRUSHES RIGEL PRODUCTS

    $7.99$7.99

    Angled Stems Get Into Hard-To-Reach Places; Nylon, Bronze Or Steel BristlesHandy cleaning brushes have 30º angled stems that make it easy to get into tight corners, cavities, channels, and crevices. Great for removing carbon deposits, rust, dirt, and other debris from those hard-to-reach spots. Makes cleaning and maintenance go faster, saves you time. Easy to grasp 3" wood hand, steel 21⁄8" long stem, and a variety of bristle materials and sizes. Available in three-paks of Small (approx. .075" dia.) or Medium (approx. .115" dia.) that contain one each nylon, phosphor bronze, and stainless steel brushes. Pointed brushes available in three-paks with all-Bronze or all-Stainless bristles in three sizes (approx. .075", .115", and .240" dia.). Big Book Catalog, Issue:69, Page:341

    HOT!
  • AR-15 Action brush SINCLAIR INTERNATIONAL More Detail

    AR-15 Action brush SINCLAIR INTERNATIONAL

    $6.99$6.99

    The action and carrier key passage on AR rifles are areas which need frequent attention to maintain top accuracy. Our AR-15 Action Brush does an excellent job of cleaning the powder/carbon blowback from inside the receiver body. The carrier key passage needs to be cleaned out with a stiff stainless brush to maintain proper functioning of the rifle. Both of these brushes are sized correctly for their specific purposes. All AR cleaning kits should include both brushes. Sinclair, Issue:5B, Page:158

    HOT!
  • RAPID LUBE 202 MARSH SHIPPING SUPPLY More Detail

    RAPID LUBE 202 MARSH SHIPPING SUPPLY

    $31.99$31.99

    Makes Quick Work Of Firearm Lubrication & MaintenanceInnovative cleaning brush and fluid dispenser holds 4 fl. oz. of lubricant that dispenses by the push of a button. Soft, natural-bristle brush cleans dirt and debris without damaging your guns finish and helps spread the liquid released from the reservoir. Excellent for lubricants, cleaning fluids, or any liquid you want to apply to your firearm. Perfect size for the shop or the range. Doesnt include lubricant. Big Book Catalog, Issue:69, Page:351

    HOT!
  • AR-15 Carrier key brush SINCLAIR INTERNATIONAL More Detail

    AR-15 Carrier key brush SINCLAIR INTERNATIONAL

    $5.99$5.99

    The action and carrier key passage on AR rifles are areas which need frequent attention to maintain top accuracy. Our AR-15 Action Brush does an excellent job of cleaning the powder and carbon blowback from inside the receiver body. The carrier key passage needs to be cleaned out with a stiff stainless brush to maintain proper functioning of the rifle. Both of these brushes are sized correctly for their specific purposes. All AR cleaning kits should include both brushes. Sinclair, Issue:5B, Page:158

    HOT!
  • IDT BORE BRUSH OTIS More Detail

    IDT BORE BRUSH OTIS

    $13.49$13.49

    Scrubs & Mops Bore In One Pass For Fast, Easy, Thorough CleaningDual-action brush scrubs and swabs in one step to make bore cleaning faster and easier than it's ever been. Integrated Dual Technology combines deep-scrubbing bronze bristles and an absorbent cotton mop on one brush so you can thoroughly clean rifle and pistol bores in one breech-to-muzzle pass. Non-corroding brass core ensures the IDT brush won't scratch your gun's rifling, while dense, non-scratch phosphor bronze bristles loosen fouling and the gentle 100% cotton mop wipes the bore clean of contaminated solvent and loosened fouling. Speeds up the tedious job of cleaning lever-action rifles and other guns with limited breech access. Perfect for fast cleaning in the field; 8-32 tpi threads fit the Memory Flex rods in Otis compact cleaning kits, as well as standard bench cleaning rods. Available in four popular rifle and handgun calibers: .17, .243/.25/.257/6.35/5.56mm/5.7mm/6mm/6.5mm, .308/7.62, and .357/.38/9mm. Big Book Catalog, Issue:69, Page:334

    HOT!
  • ANGLED CLEANING BRUSHES BIRCHWOOD CASEY More Detail

    ANGLED CLEANING BRUSHES BIRCHWOOD CASEY

    $9.49$9.49

    Gets Into The Tight Spots Where Fouling Builds UpAngled shanks make these little brushes shaped like precision dental instruments to get into those hard-to-reach nooks and crannies on all kinds of firearms. 3-pak includes two brushes with stainless steel wire bristles and one with less aggressive nylon strands. Long wooden handles with steel tube shanks provide comfort and plenty of backbone to handle tough scrubbing jobs. Stiff, stainless steel bristles work best for removal of fouling that other brushes wont tackle, such as stubborn carbon and burnt-in powder deposits, even welding scale. Use only on interior surfaces or prior to polishing and refinishing as these bristles will scratch most gun steels and surface finishes. Nylon bristles work well for most general cleaning applications and with todays new generation bore cleaners that can chemically attack brass and bronze bristles. Big Book Catalog, Issue:69, Page:340

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!