• M16 B-TAC BOLT CARRIER GROUP MPI/HPT 9310 NITRIDE BROWNELLS More Detail

    M16 B-TAC BOLT CARRIER GROUP MPI/HPT 9310 NITRIDE BROWNELLS

    $99.99$99.99

    Complete M16 B-TAC Bolt Carrier Group: Fully assembled Bolt Carrier Group; including the bolt, bolt carrier, gas key, firing pin, cam pin, and firing pin retaining pin Every Bolt is High Pressure Tested (HPT) with a proof load Following the High Pressure Test, every Bolt is Magnetic Particle Inspected (MPI) The Bolt is machined from 9310 steel Following machining, the Bolt is heat treated and shot peened Installed extractor includes black rubber insert with spring M16 Bolt Carrier is machined from 8620 steel and hardened M16 Bolt Carrier will function in semi-auto or full-auto AR-15/M16 Gas Key Screws are properly torqued and staked Bolt and Bolt Carrier feature a matte black ntride finish

    HOT!
  • BOLT CARRIER KEY HIGH STANDARD More Detail

    BOLT CARRIER KEY HIGH STANDARD

    $16.00$16.00

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:096 Big Book Catalog, Issue:68, Page:620

    HOT!
  • AR-15 BCMGUNFIGHTER™ CHARGING HANDLE BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ CHARGING HANDLE BRAVO COMPANY

    $49.95$49.95

    Unique Latch Mechanism Reduces Wear & Prevents Breakage Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that’s ¼" longer for an even bigger, “can’t miss” grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependability. AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:032 Sinclair, Issue:5B, Page:250

    HOT!
  • M16 MIL-SPEC MP/HPT BOLT CARRIER GROUP BROWNELLS More Detail

    M16 MIL-SPEC MP/HPT BOLT CARRIER GROUP BROWNELLS

    $139.99$139.99

    Complete M16 Bolt Carrier Group: Fully assembled Bolt Carrier Group; including the bolt, bolt carrier, gas key, firing pin, cam pin, and firing pin retaining pin Every Bolt is High Pressure Tested (HPT) with a proof load Following the High Pressure Test, every Bolt is Magnetic Particle Inspected (MPI) The Bolt is machined from Carpenter 158 steel Following machining, the Bolt is heat treated and shot peened Installed extractor includes black rubber insert with spring M16 Bolt Carrier is machined from 8620 steel and hardened Interior of Bolt Carrier Carrier Key & Bolt Carrier are chrome lined M16 Bolt Carrier will function in semi-auto or full-auto AR-15/M16 Gas Key Screws are properly torqued and staked Bolt and Bolt Carrier feature a matte black mil-spec finish AR-15, Issue:11, Page:011 Big Book Catalog, Issue:69, Page:011 Sinclair, Issue:5B, Page:248

    HOT!
  • AR-15 RAPTOR CHARGING HANDLE 5.56 AXTS WEAPONS More Detail

    AR-15 RAPTOR CHARGING HANDLE 5.56 AXTS WEAPONS

    $85.99 - $94.95$85.99 - $94.95

    For Fast, No-Slip Charging Of Rifle With Left Or Right Hand Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm “blading” motion or the traditional finger/thumb hold. Dual, over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won’t cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too. AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:033

    HOT!
  • AR-15/M16 B.A.D. LEVER™ MAGPUL More Detail

    AR-15/M16 B.A.D. LEVER™ MAGPUL

    $28.45$28.45

    Lets You Release The Bolt With The Trigger Finger; Improves Readiness & EfficiencyThe Magpul Battery Assist Device (B.A.D.) is an extended bolt release that allows the shooter to keep his hand in the ready position on the pistol grip and operate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly required. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and factory bolt catch retains normal function with B.A.D. installed. Made of a high-grade aluminum alloy, hardcoat anodized to MIL-A-8625F, Type III, Class 2 spec for extra strength and wear resistance. AR-15, Issue:11, Page:035 Big Book Catalog, Issue:69, Page:034 Sinclair, Issue:5B, Page:250

    HOT!
  • AR-15 B-TAC BOLT ASSEMBLY 9310 NITRIDE BROWNELLS More Detail

    AR-15 B-TAC BOLT ASSEMBLY 9310 NITRIDE BROWNELLS

    $49.99$49.99

    Complete B-TAC Bolt Assembly includes a ready to drop in component for your AR-15 or M16.  Bolt is machined from 9310 high performance steel.  Included components are bolt body, extractor assembly, ejector assembly and gas rings.  Bolt assembyl features a matte black nitride finish.

    HOT!
  • AR-15 CHARGING HANDLE DPMS More Detail

    AR-15 CHARGING HANDLE DPMS

    $26.99$26.99

    Factory DPMS AR-15/M16 Charging. Machined from aluminum with a matte black anodized finish. AR-15, Issue:11, Page:033 Big Book Catalog, Issue:69, Page:033 Sinclair, Issue:4B, Page:224

    HOT!
  • AR-15 BCMGUNFIGHTER™ AMBIDEXTROUS CHARGING HANDLE BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ AMBIDEXTROUS CHARGING HANDLE BRAVO COMPANY

    $72.95$72.95

    Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Ambidextrous Charging Handle features a latch on both the left and right hand sides. AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:032

    HOT!
  • M16 5.56 BOLT CARRIER GROUP BRAVO COMPANY More Detail

    M16 5.56 BOLT CARRIER GROUP BRAVO COMPANY

    $169.00 - $189.00$169.00 - $189.00

    BCM® (MPI) complete bolt carrier group is fully assembled. (BCG) Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI specifications. This M16/M4 carrier includes the proper Mil-Spec gas key. Gas key is chrome lined and heat treated per GI specifications. Gas key is secured to carrier via USGI domestic mfg Grade 8 fasteners and properly staked per Mil-Specs. These properly hardened parts insure a strong staking and proper gas system functioning. The bolt assembly is machined from the correct Mil-Spec Carpenter No. 158® steel, shot peened for increased strength, includes tool steel machined extractor and ejector, BCM Extractor Spring, and is HPT (High Pressure Tested) and MPI (Magnetic Particle Inspected). Prior to shipping, all BCM Bolt Carrier Groups are test fired for function. As such, the Bolt Carrier Group will show handling marks consistent with these quality control procedures. The Flat Dark Earth version has the stripped carrier finished with an Ion Bond coating which lowers friction and allows for easier cleaning.

    HOT!
  • M16 5.56 NICKEL BORRON BOLT CARRIER GROUP SPIKES TACTICAL More Detail

    M16 5.56 NICKEL BORRON BOLT CARRIER GROUP SPIKES TACTICAL

    $229.99$229.99

    Matched bolt/carrier set is machined to mil-spec dimensions using the latest manufacturing and quality-control techniques to deliver superb reliability in both semi-auto and select-fire rifles. Carrier is hard-chromed inside and has an M16-type full-length shroud on the underside to trip the auto sear on full-auto/burst rifles. Bolt is magnetic particle inspected to ensure there are no internal flaws to compromise structural integrity and cause premature failure. Fully staked carrier key and tool steel extractor further aid reliable cycling. Laser-engraved Spike’s Tactical logo on the side of the carrier is visible when the ejection port door is open. .223/5.56 fits standard AR-15/M16/M4 rifles and is available with a FailZero EXO™ nickel-boron coating that’s smoother and slicker than hard-chrome for reduced friction and superb wear-resistance in high-intensity applications. AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:012

    HOT!
  • SUPER CHARGING HANDLES GEISSELE AUTOMATICS LLC More Detail

    SUPER CHARGING HANDLES GEISSELE AUTOMATICS LLC

    $89.00 - $99.00$89.00 - $99.00

    New from Geissele, the Super Charging Handle! These handles are ambidextrous and machined from 7075-T6 Aluminum. They are hard anodized in Black or DDC.

    HOT!
  • AR 308 RAPTOR CHARGING HANDLE 7.62 AXTS WEAPONS More Detail

    AR 308 RAPTOR CHARGING HANDLE 7.62 AXTS WEAPONS

    $99.99 - $104.45$99.99 - $104.45

    Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm “blading” motion or the traditional finger/thumb hold. Dual, over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won’t cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too. AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:033

    HOT!
  • M16 5.56 NICKEL BORON BOLT CARRIER GROUPS WMD GUNS More Detail

    M16 5.56 NICKEL BORON BOLT CARRIER GROUPS WMD GUNS

    $189.99 - $219.99$189.99 - $219.99

    Each WMD bolt-and-carrier set is precisely machined from high-grade steel alloy to government M16 specs, then given WMD's proprietary NiB-X nickel boron coating that results in a super-smooth, harder-than-chrome surface. NiB-X reduces friction to the bare minimum and is impervious to corrosion and abrasion. The slick finish also keeps carbon from adhering, so clean up is much faster and easier than with standard parts. Ideal choice for 3-gun competitor sand other high-volume shooters. Available with a matching NiB-X coated hammer for the smoothest cycling. Also available as an M16 Bolt Carrier Group. AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:013

    HOT!
  • AR-15/M16 V2 EXTENDED BOLT RELEASE PHASE 5 TACTICAL More Detail

    AR-15/M16 V2 EXTENDED BOLT RELEASE PHASE 5 TACTICAL

    $49.99$49.99

    Extended release lever speeds magazine changes and enhances the shooter’s ability to clear jams, double feeds, and malfunctions quickly and safely. Lets you catch and release the bolt with the trigger finger inside the triggerguard, instead of with your off hand. Push upward on the lever to lock the bolt rearward; push lightly downward to release it. Both operations can be performed without removing your hand from the pistol grip. EBRv2 is a one-piece, direct replacement for the factory bolt release that offers the lowest possible profile. AR-15, Issue:11, Page:035 Big Book Catalog, Issue:69, Page:034

    HOT!
  • 308 AR BOLT CARRIER GROUPS BROWNELLS More Detail

    308 AR BOLT CARRIER GROUPS BROWNELLS

    $229.99$229.99

    The Brownells 308 AR Bolt Carrier Groups come completely assembled and inspected, ready for use in your next 308 build.  Bolt is machined from Vac Arc Premium 9310 Carburizing Steel, providing a high core hardness and high fatigue strength.  Bolt is also Magnetic Particle Inspected and shot peened.  Extractor is machined from S7 Tool Steel for extended life.  Carrier is machined from 8620 steel and properly heat treated.  Gas key is machined from 4140 steel and properly staked.  Bolt Carrier Groups are available in the standard, mil-spec Phosphate with a Chrome interior, or with a Black Nitride Finish.  These 308 BCGs, are Made in the USA. AR-15, Issue:11, Page:011 Big Book Catalog, Issue:69, Page:011

    HOT!
  • AR-15/M16 22LR BRAVO CONVERSION KITS CMMG More Detail

    AR-15/M16 22LR BRAVO CONVERSION KITS CMMG

    $194.99$194.99

    Use Economical .22 LR Ammo To Practice More & Hone Critical Shooting Skills Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive centerfire ammo. Simply replace the bolt and carrier with the conversion unit, load up the included magazine with high-velocity round-nose .22 LR ammo, and you’re ready to shoot. Precision machined from high-grade carbon or stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5.56mm NATO, including many gas piston systems.  AR-15, Issue:09, Page:007 Big Book Catalog, Issue:66, Page:007

    HOT!
  • AR-15 HABU™ MOD1 ADVANCED ENGAGEMENT CHARGING HANDLE FALCON 37 INC More Detail

    AR-15 HABU™ MOD1 ADVANCED ENGAGEMENT CHARGING HANDLE FALCON 37 INC

    $119.84$119.84

    The HABU MOD 1 Advanced Engagement Charging Handle allows for robust charging of the AR-15, while simultaneously integrating a cheek riser.  The HABU’s unique form factor is designed for the non-dominant hand to charge the rifle, much like a semi-automatic handgun, using your full grasp & hand.  This design is completely ambidextrous, with no small latches to worry about engaging.  Proper cheek weld can also be attained, without the use of stock mounted cheek risers, which often interfere with operating the charging handle.  The HABU works with any commercially available AR-15 buttstock, both collapsible & fixed.  The cheek riser’s placement can also be adjusted front to back to suite the shooter’s needs & comfort.  When shooting suppressed, gases exiting the rear almost entirely negated. The handle is machined from 7075 T6 aluminum, with the cheek riser being molded from a matte black polymer.

    HOT!
  • 308 AR LOW MASS BOLT CARRIER GROUP J P ENTERPRISES More Detail

    308 AR LOW MASS BOLT CARRIER GROUP J P ENTERPRISES

    $423.99$423.99

    Helps Reduce Felt Recoil On Large-Caliber AR Platform Rifles Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Forward assist serrations have been omitted for competition use and further weight reduction. Comes with a complete JP EnhancedBolt™ (also available separately), designed to stand up to high-heat, high-impact use. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. AR-15, Issue:11, Page:012 Big Book Catalog, Issue:69, Page:012

    HOT!
  • AR-15 5.56 LOW MASS BOLT CARRIER GROUPS J P ENTERPRISES More Detail

    AR-15 5.56 LOW MASS BOLT CARRIER GROUPS J P ENTERPRISES

    $335.99$335.99

    Precision-machined, stainless bolt-and-carrier group features JP’s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of JPBC-2A Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the receiver. Both the JPBC-2A carriers feature JP’s super-hard QPQ finish for maximum wear resistance and minimal friction. Extractor, firing pin, and all other components are included. AR-15, Issue:11, Page:012 Big Book Catalog, Issue:69, Page:012

    HOT!
  • AR-15/M16 FIRING PIN DPMS More Detail

    AR-15/M16 FIRING PIN DPMS

    $7.99$7.99

    OEM Quality For Long LifeQuality-made, original-style, chrome pin. Perfect for replacement of worn or damaged pins; great for building new rifles. Small collar fits all carriers. AR-15, Issue:11, Page:040 Big Book Catalog, Issue:69, Page:039

    HOT!
  • AR-15/M16 TACTICAL LATCH BADGER ORDNANCE More Detail

    AR-15/M16 TACTICAL LATCH BADGER ORDNANCE

    $17.99$17.99

    One Hand Operation Of Charging Handle Oversized for quick access from all shooting positions. Allows brisk, easy operation with left hand. Makes the charging handle easier to find and operate, especially on scope-mounted flat top receivers. Great for three gun shooters; expedites reloads and immediate action drills. Legal for NRA High Power, Match Rifle shooters. Works on all AR-15/M16-type rifles including the AR-10 and SR-25. Easy, no-gunsmithing installation. AR-15, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:033 Sinclair, Issue:5B, Page:250

    HOT!
  • M16 TITANIUM NITRIDE BOLT CARRIER GROUP PRIME WEAPONRY More Detail

    M16 TITANIUM NITRIDE BOLT CARRIER GROUP PRIME WEAPONRY

    $199.99$199.99

    Prime Weaponry’s M16 Titanium Nitride Bolt Carrier Group, ready for installation.  Titanium Nitride finish provides a unique look, while provide excellent lubricity, hardness and corrosion resistance.  Carrier is made with 8620 hardened steel and the bolt is made from 9310 Vac-Arc Premium Carburizing Steel which has a high core hardness and high fatigue strength. Gas Key is properly staked, and bolt is magnetic particle tested.

    HOT!
  • MAUSER 98 M70-STYLE BOLT SHROUD WITH SAFETY DAKOTA ARMS More Detail

    MAUSER 98 M70-STYLE BOLT SHROUD WITH SAFETY DAKOTA ARMS

    $149.99$149.99

    Final Professional Touch For Mauser ModificationsClassic Model 70-style safety and bolt shroud for the equally classic Mauser action. Combines the gas deflecting design of the original Mauser bolt shroud with the three-position, side-swing safety of the Model 70 for better scope clearance. Supplied in-the-white. Gunsmith installation required. Big Book Catalog, Issue:69, Page:158

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!