• 37MM FLARE LAUNCHERS & KAOS STOCK SYSTEMS SPIKES TACTICAL More Detail

    37MM FLARE LAUNCHERS & KAOS STOCK SYSTEMS SPIKES TACTICAL

    $219.99 - $599.99$219.99 - $599.99

    Breech-loading 37mm flare launcher clamps securely to the bottom rail of any 7" or longer Picatinny handguard. Lets you use 5¾" U.S. Coast Guard approved flare, smoke, or gas rounds for field operations or training. A single push of the button quickly opens the launcher to remove a spent round and insert a fresh cartridge. STZ pushbutton cylindrical breech lock is far stronger than lever locks typically used on this type of launcher. 9" Launcher has pivoting tube that swings to the side for loading. 12" Launcher tube slides forward for rear feed. Mounting hardware and instructions included. Kaos Stock Systems allow you to take your existing rail mounted Havoc Launcher and turn it into a stand-alone weapon system. It is compatible with most aftermarket AR-15 stocks, latch plates & pistol grips. Kaos Stock System features a ST M4 Stock as well as Mil-Spec A2 pistol grip, 1913 Picatinny Top Rail, Buffer Tube, Latch Plate, and Castle Nut. Available for 9" and 12" Launcher. AR-15, Issue:11, Page:010 Big Book Catalog, Issue:69, Page:009

    HOT!
  • MAGAZINE EXTENSION SUPPORT CLAMP NORDIC COMPONENTS More Detail

    MAGAZINE EXTENSION SUPPORT CLAMP NORDIC COMPONENTS

    $30.99 - $45.99$30.99 - $45.99

    Provides Extra SupportStrong, lightweight aluminum clamp attaches securely to barrel to provide extra support for extended magazine tube. Eliminates unwanted vibration under recoil to ensure smooth, reliable feeding of rounds. Low-profile design, rounded edges, and flush-mounted hex-head machine screws prevent snags and damage to patrol car interiors; hardcoat anodized surface adds strength and exceptional resistance to surface abrasion. Available in Standard model and Tactical Rail configuration with Picatinny-type accessory rail that may be positioned on left or right side of clamp for mounting flashlights and other accessories. Also available for Mossberg. Big Book Catalog, Issue:69, Page:199

    HOT!
  • SHOTGUN RECEIVER MOUNT PICATINNY RAIL MESA TACTICAL PRODUCTS, INC. More Detail

    SHOTGUN RECEIVER MOUNT PICATINNY RAIL MESA TACTICAL PRODUCTS, INC.

    $29.99 - $41.99$29.99 - $41.99

    Mount Optics Or Tactical Sights One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four steel, Allen head screws secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads. Big Book Catalog, Issue:69, Page:246

    HOT!
  • REMINGTON 870 SADDLE RAIL MESA TACTICAL PRODUCTS, INC. More Detail

    REMINGTON 870 SADDLE RAIL MESA TACTICAL PRODUCTS, INC.

    $89.99$89.99

    Easy-Install Mount For Scopes, Red Dots & Other Tactical SightsOne-piece saddle mount has integral MIL-STD 1913 Picatinny rail that lets you attach a scope, red dot reflex sight, or other tactical sighting device to your Remington 870 shotgun. Low profile 8¼" rail also offers plenty of room to mount a night vision device or long eye relief scope. Four, steel, Allen head cross-bolts replace the factory trigger pins to create a rock solid grip between the saddle mount and receiver. Precision machined aluminum with cutouts that reduce weight without sacrificing strength. Big Book Catalog, Issue:69, Page:245

    HOT!
  • REMINGTON / BENELLI TACTICAL BARREL / MAGAZINE CLAMP MESA TACTICAL PRODUCTS, INC. More Detail

    REMINGTON / BENELLI TACTICAL BARREL / MAGAZINE CLAMP MESA TACTICAL PRODUCTS, INC.

    $54.99 - $83.99$54.99 - $83.99

    Secures Extended Mag Tube & Mounts Accessories Up FrontLightweight, aluminum clamp locks barrel and extended magazine tube together to form a rigid, rock-solid assembly. Can be used as a tactical light mount: install a 1" diameter light in one side of the clamp and secure the other side to the barrel or magazine. Left- and right-side sling swivel sockets accept standard pushbutton swivels. Two steel Allen head screws pull the clamp halves together for a tight, non-slip hold. Also available with a 2" long, 4-slot, MIL-STD 1913 Picatinny rail that can be installed in the 3- or 9- o’clock position, for mounting additional accessories. Fits Remington 870, 1100, 11-87 and Benelli M1, M2, M4, M1014, 12 gauge shotguns. Big Book Catalog, Issue:69, Page:198 Big Book Catalog, Issue:69, Page:374

    HOT!
  • QUICK-RELEASE ACCESSORY MOUNT AMERICAN DEFENSE More Detail

    QUICK-RELEASE ACCESSORY MOUNT AMERICAN DEFENSE

    $83.75 - $87.99$83.75 - $87.99

    Patented, Easy-On/Easy-Off System For Mounting Lights, Vertical Grips & Other AccessoriesConvenient, quick-detach mount clamps solidly to almost any Picatinny or Weaver-style rail for mounting weaponlights, vertical grips, lasers, optics, and other accessories that need to be removed and reinstalled quickly. Increases the flexibility of your weapon and allows quick changes of accessory configuration to meet individual mission requirements. Lever-lock system will not work loose under recoil; the more force acting on the lever, the tighter it locks, yet when you depress the release tab, the lever swings open easily. Adjust gripping force with a flat head screwdriver or coin for an ultra-secure fit even on non-mil-spec, over- or under-sized rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Locking bar on the side of the mount engages maximum rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement with rail slots. AR-15, Issue:10, Page:085 Big Book Catalog, Issue:69, Page:088

    HOT!
  • AR-15/M16 45-DEGREE ANGLE MOUNT BROWNELLS More Detail

    AR-15/M16 45-DEGREE ANGLE MOUNT BROWNELLS

    $26.99$26.99

    Offset Mount For Positioning Tactical Accessories Right Where You Need ThemFor situations where the standard 3, 6, 9, and 12 o’clock positions don’t work, we developed this offset angle mount for positioning weapon lights, lasers, and other tactical accessories exactly where you need them. Won’t interfere with the view through the primary optic or backup iron sights, and allows mounting of a holographic red dot sight next to your scope for quick transitions to engage close-range targets. Simply cant the rifle slightly to the side to use the red dot. Lets you position a tactical flashlight for easy thumb activation of a tailcap switch without interfering with the optic. Fully machined from strong yet lightweight 6061 T6 aluminum billet, then hardcoat anodized for added strength, with a durable, non-reflective matte black finish that matches most AR-15 receiver finishes. A tunnel through the mount minimizes obstruction of your forward view, and additional circular cuts in the mount body further reduce weight without sacrificing strength. Ultra-secure clamping system fits any MIL-STD 1913 Picatinny rail, and is easy to install, remove, or reposition in the field or at the range. Full-length locking bar, hardened 4140 steel crossbolt, and an oversized, hex-head lock nut ensure a rock-solid installation even with the hex nut only finger tight. Deep-cut slot accepts a flat-head screwdriver, or even a U.S. quarter, for additional tightening torque. AR-15, Issue:11, Page:089 Big Book Catalog, Issue:69, Page:088

    HOT!
  • STRONG ARM COSINE INDICATOR MOUNT FLATLINE OPS, INC. More Detail

    STRONG ARM COSINE INDICATOR MOUNT FLATLINE OPS, INC.

    $58.99$58.99

    Secure, machined aluminum mount slides onto the accessory dove tail of the Accu/Level to allow mounting of a cosine indicator for an unobstructed view of uphill and downhill trajectory angles. Designed to accept Flatline Ops ACI/ADI or Sniper Tool Designs indicators. Secures to Accu/Level with two stainless steel screws. NOTE: Will only fit on the Flat Line OPS Accu-levels with the flip out bubble levels. They recommend also purchasng 749-012-036 Nightforce ADI and 749-009-107 True Bore angle indicator set up tool. Big Book Catalog, Issue:69, Page:279 Sinclair, Issue:5B, Page:211

    HOT!
  • M-LOK OFFSET LIGHT MOUNT MAGPUL More Detail

    M-LOK OFFSET LIGHT MOUNT MAGPUL

    $17.99$17.99

    The M-LOK Offset Light Mount, Polymer provides the user with an ambidextrous platform to mount weapons lights at both the 11 and 1 o’clock positions on M-LOK compatible hand guards and forends. This mounting solution is constructed of polymer and has beveled ends and corners to prevent snagging. The Offset Light Mount allows for the direct attachment of the Surfire M300/600 Series Scout Light or other MIL-STD-1913 Picatinny mounts. The optional Magpul Light Mount V-Block and Rings can also be used to attach hand held lights with a diameter from .75” to 1.03”.

    HOT!
  • FLASHLIGHT/LASER MOUNT COMMAND ARMS ACC More Detail

    FLASHLIGHT/LASER MOUNT COMMAND ARMS ACC

    $16.99$16.99

    Durable, Lightweight Mounts For Rifle Or Pistol Accessory Rails Combat-proven, fiber-filled polymer mounts easily and securely slide onto Picatinny or Weaver-style rails to provide a stable mounting platform for 1" O.D. flashlights/lasers. Spring-loaded, push-button release facilitates quick attach/detach, and the integrated C-clamp firmly tightens to ensure maximum light retention. Available in 5-Position Mount configuration, which pivots and locks into five, definable positions up to 90° left or right of center allowing you to reposition the flashlight if necessary.   AR-15, Issue:10, Page:085 Big Book Catalog, Issue:69, Page:373

    HOT!
  • AR-15 TRIPLE RAIL HANDGUARD MOUNT COMMAND ARMS ACC More Detail

    AR-15 TRIPLE RAIL HANDGUARD MOUNT COMMAND ARMS ACC

    $24.99$24.99

    AR-15, Issue:07, Page:078 Big Book Catalog, Issue:64, Page:078

    HOT!
  • 12 Gauge Barrel Accessory Mount RS PRODUCTS LLC More Detail

    12 Gauge Barrel Accessory Mount RS PRODUCTS LLC

    $62.00$62.00

    The BM-12G is an accessory mount that is intended for traditional tube-fed shotguns.  It carries a 4 cross slot 1913 Picatinny rail, clamp arms that self adjust and a 100% made in the USA construction.  The body is 6061-T6 mil-spec hard anodized and all hardware is SS.

    HOT!
  • PICATINNY SIDE-MOUNT ADAPTER WARNE MFG. COMPANY More Detail

    PICATINNY SIDE-MOUNT ADAPTER WARNE MFG. COMPANY

    $22.52$22.52

    Fits Any Picatinny 1913 Mount Perfect For Holding Tactical AccessoriesAluminum, space-saving, side-mount adapter fits on Picatinny rails to let you mount flashlights, laser-light systems, red-dot scopes, and more. Attachment leg doesnt interfere with the mounting of your scope; no need to sacrifice optics for accessories. Will not fit Weaver bases. AR-15, Issue:10, Page:086 Big Book Catalog, Issue:68, Page:093

    HOT!
  • RUGER® 10/22® ACCESSORY BAND SUPERIOR CONCEPTS, INC. More Detail

    RUGER® 10/22® ACCESSORY BAND SUPERIOR CONCEPTS, INC.

    $29.99$29.99

    Easy Installation, Provides Mounting For Lights, Lasers & Slings Barrel band with integral Weaver-style rails is perfect for mounting flashlights, lasers, slings, and other essential accessories without modifying the stock. Features a 2-slot bottom rail and horizontal single slot rail for additional accessories. Low profile top provides clearance for backup iron sights. One-piece design replaces factory original; clamps tight with included Allen head cross-bolt for a solid, no-slip fit. 3-Rail Mount Accessory Band – Reinforced nylon composite barrel band with integral Picatinny rails. Features a two-slot bottom rail and two, single-slot side rails for additional accessories. One-piece design replaces factory original; clamps tight with included Allen head cross-bolt. Includes Allen wrench. Big Book Catalog, Issue:69, Page:154

    HOT!
  • MODULAR ACCESSORY TACTICAL RAIL (MATR) FOR THE AR-15/M4 SAMSON MANUFACTURING CORP More Detail

    MODULAR ACCESSORY TACTICAL RAIL (MATR) FOR THE AR-15/M4 SAMSON MANUFACTURING CORP

    $139.99$139.99

    Customize Your Rifle With Accessories In Seconds 6061 T6 aluminum construction CNC machined Hard coat anodized finish Lightweight Easy to install Fits M4 style of AR-15/M16 handguard Attaches to existing handguard 4 attaching slot head screws No permanent modifications to firearm for installation 1913 Mil-Spec rails 3 detachable rails 6 rail location configuration Ventilation gap between rails and handguard Does not interfere with tactical sling Have you been researching accessory rails for your M-4 but don’t want to add more weight to your existing weapon? The Samson Modular Accessory Tactical Rail may be your answer. The MATR is CNC machined of 6061 T6 aluminum and finished with a corrosion-resistant hard coat anodized matte black finish, which matches the color of your rifle. It is lightweight, easy to install, and made to fit the M4 style of AR-15/M16 handguard. To install, simply use the four slot head attachment screws and clamp the rails directly to your existing handguard – no need to permanently modify your rifle. The three detachable rails are of the 1913 Mil-Spec design, which will attach any accessory securely to your rifle. With six different rail locations, you can configure for any attachment. There is a ventilation gap between the rails and the handguard to help with heat buildup during operation and the rails won’t interfere with a tactical sling. The Samson Modular Accessory Tactical Rail is the answer for attaching just what you need on your M4 while not adding more weight than you have to.

    HOT!
  • TRG ALL HARNESS FASTENING RAIL MILITARY SAKO More Detail

    TRG ALL HARNESS FASTENING RAIL MILITARY SAKO

    $89.99$89.99

    FITS: Sako Big Book Catalog, Issue:67, Page:571

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!